Search results

There is a rear corner panel that is in the gap from the rear fender to the back window. It's about 12" Tall and 5 inches wide with a taper. Comes off in the tunnel. Panel is in perfect shape. None of the clips or eyelets appear damaged. Only issue are some paint chips from where it hit the...

Their phone number is listed on the page with the first (left most) Tab http://www.thewobblehead.com/index.html I guess asking to quote is a courtesy, but once you post something on a public forum I think their is no quarrel with anyone who quotes you. But that is more of a legal than...

I would start with 6 to see what is most popular in you area. (I think popularity varies with demographics.) Over time you may wish to have the most popular in both, eliminating the least popular. Initialy I tried to have them all different with as many as perhaps 9 different ones. Over time...

OOOPs my Bad Per link above 4 ft T5 = 4750 Lumens x 4 = 19,000 8 ft T12 = 7650 Lumens x 2 - 15,300

Pine, Cherry, New Car. Other Popular ones are Vanilla and lemon.

I don't know if this is rhetorical or not 2x110 per fixture = 220 and 4x54 - 216. Savings of 4 watts or about 2%. But, per link above The 4 T5s give 1530 lumens vs 9500 for the T12s

Found Chart Sonnys catalog page 423

Made that switch about 20 years ago. Still having issues. As I said, Typicaly bottom row of Wrap.

Another thread asked for suggestions to make cloth easier to remove. Bottom row on wraps seems to be biggest headache. Seems this is where the grit accumulates perhaps running down from above. Have had to use a 4.5" grinder with cutting wheel and run it down the slot to cut the plastic...

Where can I find a speed / torque chart for Char Lynn and Parker Hydraulic motos. Here is the problem. Had a 4 brush Slant Unit each brush plumbed seperately to a 4 bank AVW power pack. Speed controls have a 3/8 inlet. Each speed control is supplied from the flow divider with 1/2" SS...

Trust, honesty and believing is not the issue. I am seeking wisdom. People believed the earth was flat and trusted that the sun revolved around the earth. These were honest and intelligent people. Lets accept for an example that the unt costs $6000 more than the Hydrominder / flo jet...

I'd like to know how and why the Hydraflex saved $, There are lots of reasons any new system would save $ compared to an old system someone was using from wworn nozzles to improper dilutions. I understand the savings "Pitch". I just don't understand the "How". Everyone who wants to sell me...

Is this a tunnel or SS?

Here is the website info http://www.hydraflexinc.com/chemical-dispensing-videos/ Both Hydraflex and hydrominders use varying size changebale venturi tips. So, I am cluelss as to why one would be more accurate or easier or harder to control. No mention of changing anything remotely...

I know they pitch it as saving on chem costs but the rationale escapes me. (Both the hydroflex and Hydrominders work off a venturi principle.) The pitch involved applying solutions at higher pressure. High pressure is irrelevant for foaming applications At one time we applied drying agent at...

So, the panel on their website can replace 7 foaming Traditional Hydrominder / flo jet mixing pumping stations. Individual components would run about $650 with Viton Flo Jets, and Tommy's has them ready made for $860 or a little over $6000 for the traditional equivelant. To be fair the Hydro...

Wow, I am not expereiencing any rusting like that. I feel some of the clips are flimsy and seem to open coming off the float so I just loop the chain thru the hole and the eye that the clip is attached to.

The cost for a single panel with motor starter and 2 pumps is???????

I wonder how the data for that 40% was obtained?

Interesting comments. I have no issues with the screws on top. I do prefer the rebuild kits with metal stems. What issue do you have with the screws? 2. No issues with the connecter to the wire loop. What issue are you having? 3. I wonder why the product affects your diaphram. The Diaphram...