Search results

Are you saying that you tested each individual motor or both together? If together then the amp draw seems low but if individually then your numbers seem high.

Washworld needs to take note of this.

What area are you located in?

Are you checking amperage draw for each motor with a clamp on meter?

What is the difference between that wheel and the 11-0016G? It looks like it is specifically for the golden dollar which is the same dimensions as a standard modern US dollar coin.

What if we took Mep's idea to the next level and dispensed mixed high security tokens with dollar coins? (maybe reverse proportions with 20% dollars/80% tokens) Could a Hamilton changer dispense both a 1.073 taken and a 1.043 dollar coin without issues? Thoughts?

Aren't these typically installed with some type of protection from lightning like a surge arrester or protector? It was suggested by my Unitec distributor to do so and I assume Hamilton would be the same. As expensive as these things are I would not want to install one without it.

You have hot foam brush soap?

Just hide the swiper inside the meter box or auto cashier. Of course you will only be able to accept the cards that have the tap to pay feature. Around here I bet there are less than 50 percent of them that are tap to pay. I just got a new debit card in the mail to replace my expired one. It is...

Get a Hach 5B harness test kit to test the harness of the incoming water there.

That does not look like Loctite and the green stuff is not even a thread locker so Cat would not have used it. Maybe it is some type of anti-seize? If so it apparently didn't work very well. A little heat still might help soften whatever it is.

If it is green Loctite then it is for slip fit parts that you don't want to move around after curing. (retaining compound) I recently discovered these products looking for a solution to an issue. (not car wash related) They make several different types and 620 comes to mind. You have to use heat...

Interesting idea. Does anyone have luck with removing the knob without damage? I have a really nice Klein screwdriver that fits perfect but the screw always seem seized. Usually I resort to breaking them off by crushing them with vise grips.

Many times people don't know what they are doing when adding a ceiling fan and the wires are not connected properly. Take the ceiling fan down to get access to the box and I bet you find the issue there. If not then check the receptacle boxes in that room for a newer wire coming out of it to...

You need to find the box that the power comes from to see if there is a bad connection or broken wire. Is this an older house that this circuit has been added after it has was built?

What is causing this?

I have not seen that issue but do you have a Cryptotap on there also? They can cause strange issues.

That sucks. What does your policy state? Cash value or replacement cost on payout?

If it is a good location then why is it shut down and gutted? If you bought all new and had it installed you could be looking at big money. Booms, boilers, pump stands, changers, vendors, tanks, RO system, vacs, lighting fixtures, bay meter boxes, the list goes on. Depending on what level of...

Are you heating the water or is there a heat exchanger in the storage tank and you are heating the antifreeze?