Search results

My local rental place charges $372 (after rental insurance and tax) per day plus $278 deposit for the smallest towable boom lift. (35')

If it is dumb to keep your keys at the car wash (and I'm not denying that) what then do you do when you have multiple employees that also work at several of your locations?

This think clacks when only one bay is turned on and does not change if all three are turned on. Does it not matter because it is pumping the same volume all the time but bypassing all it is not delivering back to the tank? Is there a completely different type of pump that may work better for...

We are still having issues with this. A few weeks ago I replaced the mesh strainer and re-sealed all plumbing fittings on it. Nothing changed. When we slow down it is fine for many days but when it gets used a lot it is bad. Super Wash built hundreds of these washes with this setup so I want to...

If it is the newer 16 mm diameter button then search for this: PV6H240SS-331 You can get them at many places on the internet. You will have to solder 4 24 gauge wires on it, break the seal on the swiper case, reuse the button retaining nut (the corners are ground off) and re-seal the case...

Don't you want to replace what you shoot?

I have seen similar numbers. Things are bonkers right now. I can't remember what metal roofing percentage increases my contractor told me but I remember that I almost passed out when I saw it translate to the dollar amount.

I like putting 5.56mm or 7.62mm diameter holes in my frustrating car wash equipment. :)

You could also try Houdini lock lube. It is thinner than WD-40 so it may get in there quicker/easier. I had a similar situation: The plug lock would remove and reinstall but I could not get the key back out. I think WD-40 might be better for preventative maintenance though because it repels...

I did notice that our fittings are getting corroded on the inside.

This is how you refund a customer using the accessmyIQ website on a computer: Wait until the transaction has posted. (two hours after first swipe) Log into Cryptopay and click "recent purchases". Find the transaction and copy the transaction ID. Log into accessmyiq and make sure your browser...

We were thinking of trying that too because we really like them for the wands. If we did try one I would probably move one over to the brush from the wand and put a new one on it. When new they are really stiff and kinked up but after a short time they are nice. I'm guessing it is the hot water...

Cryptopay is awesome to deal with. The swipers are very good IMHO except that they can't read certain cards. Most times the card strips are worn but some look brand new. I have a few cards that swipe perfect at other businesses but will rarely work on our swipers. The buttons do wear out quickly...

It would be helpful if they made the outside diameter of the inlet screen rubber washer about an 1/8" smaller.

What will the people do while their car is charging? Is there another business next door that might occupy their time? The ones I see around here are at a store of some type.

Talk Car Wash group on Facebook.

https://www.kleen-ritecorp.com/s-61-pump-stand-wiring.aspx

https://www.kleen-ritecorp.com/s-60-coin-box-wiring.aspx

You didn't understand how it worked so you cut all the wires out?

All fixed.