Waxman
Super Moderator
Just changed out my Tapeswitch single start pad for my IBA. On the advice of a friend, I used 3 of the smaller tapeswitches in a row, 2 for 'stop' and 1 for 'backup'. My reasoning is cost savings; the big, single pad is expensive and the smaller ones are less $$. Plus, when the big one goes bad, it's only one area of it that gets glitchy. So now, my thinking is that I can replace one smaller pad at a time in the series of 3, depending on where most customers stop.
We'll see, I guess.
We'll see, I guess.
