What's new

100' Conveyer question

washregal

Member
Joined
Sep 11, 2007
Messages
410
Reaction score
13
Points
18
Location
Pennsylvania
Hello - looking at a wash that has a 100' Conveyer PECO rear wheel load - Realistically how many cars per hr could I move through this equipment?
 

pjhuzz

New member
Joined
Jun 1, 2020
Messages
9
Reaction score
1
Points
3
Location
Michigan
We used to push 120/hr through our wash, however we used to manually prep each vehicle before they went through. Now a days they barely even spray the car so you might get more than 120.
 

washnshine

Well-known member
Joined
Feb 21, 2014
Messages
1,990
Reaction score
1,525
Points
113
Location
NY
100 foot conveyor - it also depends what components you have in there in order to really judge how many cars you can wash with sufficient quality.
 

Earl Weiss

Well-known member
Joined
Aug 31, 2007
Messages
6,369
Reaction score
941
Points
113
100' Conveyor does not mean 100" feet of equipment.. In a cold Climate you may need to start 10 feet inside each door. Also dirt conditions can dictate line speed. Had a location with 2 mitter wrap combos with lower details under.. Hung the initial pre soak and soap off the forst unitfrom struts to eliminate first arch. Then Triple foam wax and mini mitter followed by Arch with Rinse, Drying Agent , Sealer Wax, and setting arch Flash dryer then some drip space and 3 Blower arches. I think it was 85' from first to last piece. 150+ cars was possible but the limiting factor was human & payment processing - not tunnel equipment.
 
Top