What's new
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

CAT 2120 Pump Motor Lubrication

I've never done it. Most of my motors are original and many years old (some, decades). The bearings are sealed so I can't imagine that it could do any good.
 
Its funny I had a few noisy motors so I tried to grease them with the factory installed grease zerk. Did nothing, could hardly pump any grease into them. So I took the end plate off motor and pulled armature out and the bearings dont even have a groove for grease?? Why do they build things like this? Pulled bearings and replaced, motors have been like new since.
 
The lubrication interval is something crazy like 64,000 hours. Don't lubricate regularly or you will just clog up the windings and make them fail.
 
I had a few that were making noise so I took them apart and the yearly greasings had gotten all over the place. I cleaned them up and replaced the bearings with sealed bearings and they work great.
 
Back
Top