The Waterboy
Member
Well I'll be dipped in dogsh**, that is a timer assembly I have never seen! Does it no longer work?
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Fleck 9500 water softener issues
- Thread starter Detbjr
- Start date
It partially works. The display flickers, it seems the programming function isn’t stable - numbers will advance as if someone presses the up arrow. There’s a bad capacitor on the board I will replace to see if it helps. Otherwise I’m looking for a replacement timer that is compatible with the 9500 valve and power head.
The Waterboy
Member
I would have to see the harness on the one you have to know which one would be directly compatible but the two current timers are the SXT and NXT models. Try this site for parts:
Fleck 9500 Valve = 1 1/2 inch Piping = Twin Alternating
www.softenerparts.com
Buckeye Hydro
Active member
I think you want the NXT2 timers.
The Waterboy
Member
Do the NXT2 timers use the same wiring configuration as that old timer? I have never put one on an old powerhead. They definitely use a different transformer.
I was able to source a SXT timer and powerhead compatible with the 9500 off ebay. I was able to also replace the capacitor on the ET board and it works. Display is now working.
I do personally like the display on the nxt and XT timers the best. I bought a 3200NXT timer but apparently it doesn’t work for a 9500. Anybody know a model of this style that would work?
