What's new
By:
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Help with pre-soak!?

MEP001 Yes, if I rinse, pre soak, brush and high pressure soap then rinse it will get clean.
AutoWashMan I did have a blendco system in place till about 1 1/2 years ago I thought the cost was getting high. I have been having good luck with the products I have till now but have the blendco system still if I want to go back.
Yes I am using a 2 stage high and low ph in the touchless
Thanks for all the response I am sure I will get this figured out shortly for my customers. I appreciate the advice.
 
Semi-retired said:
MEP001 Yes, if I rinse, pre soak, brush and high pressure soap then rinse it will get clean.
Click to expand...
That pretty much confirms that there's not something in your system leaving a deposit on the finish.

To make sure your softener is working properly, buy a hardness test kit and check it every day.
 
rph9168 said:
You need to find a knowledgeable, reliable chemical rep. Time is money and bad performance loses customers. You could work on this problem for a long time by yourself without solving it. A good chemical rep should be able to resolve the issue quickly.
Click to expand...

what's the best way to find a good chemical rep for my 3 bay SS?
 
You must log in or register to reply here.
Back
Top