Well this wouldn’t be the first time I’ve been called ridiculous and most likely not the last. I have done many repairs over the years where a hose was simply thrown down a crawl space and part of it landed on a sharp object. Over time the vibrations in the hose caused a failure. I am a minimalist in that I try to do most everything with the fewest tools. I would sometimes have techs that would literally fill a van with tools to the point where they could barely function. Somehow I managed to do most repairs with a small space for tools. To each his own.
Hydraulic hose crimper recommendations
- Thread starter sparkey
- Start date
tdlconceptsllc
Well-known member
In my experience I have always caught hell with reusables leaking after installed due to dry rotted hose that needs to be replaced anyways from the equipment room all the way. But I have used them in a jerk also but always end up replacing the lines. To me reusables are Mickey Mouse solution and Crimped fitting are professional. But again a reusable can get you out of a Jerk as Long as the hose is flexible
MEP001
Well-known member
I've never heard that expression before.
tdlconceptsllc
Well-known member
Ya Mep a jerk in a Bind lol same thing. In a Tight spot
I.B. Washincars
Car Washer Emeritus
- Joined
- Aug 30, 2007
- Messages
- 4,284
- Reaction score
- 1,163
- Points
- 113
- Location
- SW Indiana melon fields.
Yeah, I always used that term for something totally different...
I've never heard that expression before either.
Up here in God's country we'd "I have used them in a pinch"
Your Tom about the hose being dry rotten, it seems like about 95% of the time the hose isn't worth repairing.
Up here in God's country we'd "I have used them in a pinch"
Your Tom about the hose being dry rotten, it seems like about 95% of the time the hose isn't worth repairing.
toddmullens
Active member
1/2” drive battery powered impact wrench makes this very easy.
After reading so many toilet recommendations, I have finally found the best fit for our bathroom. Toto Entrada toilet https://bestflushingtoilets.org/toto-toilet/entrada-review/ was made from vitreous china material, which is not only sturdy but as well simple to clean and it is one of the features we are looking for in a toilet.
Last edited:
mjwalsh
6 bay SS w/laundromat
That could be good information since NAPA (that is a few blocks from us) stated their system was Weatherhead & they adamantly stated they were limited to just Weatherhead hose! Hopefully, we don't get so hard up that we have to beg further & beyond ... than voluntarily willing to sign something indemnifying them from their possibly mostly just perceived liability fear? Caused by possible horrible court precedents that happened where-ever? Maybe a legal-eagle can respond???
Last edited:
tdlconceptsllc
Well-known member
I have a Parker Mini crimp *brand new air hookup/ Hydralic I paid $1,000 for if someone seriously wants to buy its never been used mint condition. Can send pictures. I have been buying all my hoses from CWS and don't see the need to use it yet. I want to buy a ProPress for plumbing and it could help me get up some more money lol. Thanks Thomas
For those of you using the Weatherhead T460 have you used any hose or fittings other than the weatherhead brand? We use a different model of a weatherhead crimper at work and we use eaton fittings.
