Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Laserwash 4000 Cat Pump 3535 pulsating.
- Thread starter water guy
- Start date
L
loewem
Guest
I had a problem with pulsating and it turned out to be a problem with the water saver unloader. Is it happening with high pressure and water saver?
What did you find out about this? It just started happening on my 3535 in my oasis.
soonermajic
Well-known member
WW Part# 62045* ********(2” Check Valve) :$130.00
WW Part # 65907*********Qty of 2 *(2”Close Nipple) : $7.96
WW Part# 66387-4N* **Qty of 2 (2” Nylon Street Elbow) : $14.20
Total of “All” items: $152.16
With the understanding that you will reuse the tank Bung and Screen Filte
You may try that 1st. Sometimes the larger check valve solves this issue, as the Cat takes a larger initial bust, than does the General or HyPro
WW Part # 65907*********Qty of 2 *(2”Close Nipple) : $7.96
WW Part# 66387-4N* **Qty of 2 (2” Nylon Street Elbow) : $14.20
Total of “All” items: $152.16
With the understanding that you will reuse the tank Bung and Screen Filte
You may try that 1st. Sometimes the larger check valve solves this issue, as the Cat takes a larger initial bust, than does the General or HyPro
GoBuckeyes
Self-Serve and Automatics
Check all 6 of the checkvalves on the pump head. When you find one that is cracked or that has something stuck in it, replace it. Odds are it will only be one checkvalve as those pumps are bulletproof. If you jump right on a pulsating pump there will be no need to re-sleeve or replace it. We have 3535’s that are 20+ years old still running but you can’t continue to run them with a pulse and expect them not to groove out.
