Earl Weiss
Well-known member
- Joined
- Aug 31, 2007
- Messages
- 6,373
- Reaction score
- 943
- Points
- 113
Recently started having issues with some Medeco Pluck locks in my changers. These are inside protected from the elements whereas no issues with the ones in the SS Vault doors.
First they wouldn't go in easily and I had to depress the bar on the side with my finger to get it to go in. Later, the key would not come out even if the lock was not in the housing. Had to tap the edge of the plug lock with a screwdriver or something to get the key out. . Tried lubricating and cleaning all sorts of ways. Finaly the little bar on the side of one fell out completely. Now, another has gone bad Luckily, out of the housing. Key will not make the side bar depress flush. It's not the key since it works fine in other locks.
Locks are about 7 years old and used about 2 times a week.
Am I doing something wrong?
Can I order more locks with the "Blind Code'" from any source like KR, Sonny's or Ra Lock, or does it have to be from a particular source?
First they wouldn't go in easily and I had to depress the bar on the side with my finger to get it to go in. Later, the key would not come out even if the lock was not in the housing. Had to tap the edge of the plug lock with a screwdriver or something to get the key out. . Tried lubricating and cleaning all sorts of ways. Finaly the little bar on the side of one fell out completely. Now, another has gone bad Luckily, out of the housing. Key will not make the side bar depress flush. It's not the key since it works fine in other locks.
Locks are about 7 years old and used about 2 times a week.
Am I doing something wrong?
Can I order more locks with the "Blind Code'" from any source like KR, Sonny's or Ra Lock, or does it have to be from a particular source?