Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Modding an "Old" Mark VII Pump Stand
- Thread starter 2Biz
- Start date
2Biz
Thread Killer!
It is the PH199-55..... 199K btu modulating and 55 gallon tank...The link below has it the cheapest of anybody online, that I could find. They charged $200 for shipping. It came packaged/crated better than expexted and with no issues...
http://bostonheatingsupply.com/phoenixph199-55.aspx
http://bostonheatingsupply.com/phoenixph199-55.aspx
mjwalsh
6 bay SS w/laundromat
2Biz,
On our CLA Planet laundry forum ... there is a very experienced laundromat operator (Larry Adamski of Muskegon, Michigan) who has been using two Phoenix by HTP for into a few years now & so far they are proving to be an excellent choice as he explains from time to time.
mike walsh http://kingkoin.com/USA_Deficit_Reduction.html
2Biz
Thread Killer!
The new Low Pressure System....One Air Regulator for each FB and PS system. Note old position of regulators...Before I needed CV's to keep from back-feeding the regulators when combining/teeing LP air to the bays. New system, regulator is ahead of the solenoids allowing me to eliminate the CV's...
Last edited:
2Biz
Thread Killer!
And Finally, (This one is for you IB)....The new FB and PS air shutoff solenoids to eliminate those 1500 gallon ER floods I've had in the past...
***Note the relays I used have a Red Led when activated. A nice feature***
The 1/8" SS Kips are plenty big enough for the air needed for the flojets...
***Note the relays I used have a Red Led when activated. A nice feature***
The 1/8" SS Kips are plenty big enough for the air needed for the flojets...
