coop1109
New member
Hello everyone -- I purchased a 6 bay self serve car wash yesterday and now the fun begins. Before the purchase I was able to test all of the equipment and most everything has checked out. However, the owner had leased the property before and the tenant skipped town with all of the keys to the property. I have 2 round vaults (cannot find the brand) and all of the pad locks on the meters, vacs etc. I have had 2 locksmiths look at the vaults and both have said there is nothing they can do.
I know this is a touchy subject for a newbie to ask about but any help is appreciated. All of the meters, vacs etc have the steel cover over them so they cannot be opened with bolt cutters (thankfully but frustrating). I don't mind drilling all of the locks if thats what I need to do. But some guidance will be helpful as I have never done this.
A PM or email with some guidance would be great.
Also, once I drill them, where do I find new lock cylinder for the vaults.
Thanks again.
Jeff Cooper
California Carwash
I know this is a touchy subject for a newbie to ask about but any help is appreciated. All of the meters, vacs etc have the steel cover over them so they cannot be opened with bolt cutters (thankfully but frustrating). I don't mind drilling all of the locks if thats what I need to do. But some guidance will be helpful as I have never done this.
A PM or email with some guidance would be great.
Also, once I drill them, where do I find new lock cylinder for the vaults.
Thanks again.
Jeff Cooper
California Carwash
