R.O. help

[rossallen768]

im working on a colman sparkle system am lost. so to start with end caps of membrane cans were leaking a little o i thought it was a good time to change membranes. shut the system down changed out membranes fired it back up and all it will do is reject 100% of the water. im at a loss an have no info on the system

 

[MEP001]

It's probably flushing. Give it about 15 minutes, the flush solenoid should close and the pressure will come up.

 

[Buckeye Hydro]

If the caps on your RO membrane housing(s) are leaking - you need to at least lube, or replace the orings on the cap. Changing the membrane won't address the leak.

Russ

 

[MEP001]

Changing the membrane won't address the leak.

No one suggested that it would.

 

[Buckeye Hydro]

No one suggested that it would.

"so to start with end caps of membrane cans were leaking a little o i thought it was a good time to change membranes."

 

[MEP001]

Where does that say he thought it would stop the leak?

 

[rossallen768]

I know replacing the membrane will not stop the cap o ring leak I ment it as "I'm going to be in there any way might as well change the membrane.