What's new
By:
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

SS supersaver

actually for the Supersaver it is normal. They only have 1 pump, 1 tank, 1 color for the "tri-color" gun. You can change it yourself to a multicolor (spray a different color) by adding some tanks and solenoids or to a true tri-color by changing out the whole backend (pumps, tanks, wires, etc....).
 
Must be more than one type Super Saver, the one I have has 3 pumps, one for each color with air and product sol. to control each.
 
trentu,
please disrecard my previous post for you are correct and I was wrong.

I do have only one pump with solonoids that control the differant colors that go too the foam gun.
 
thanks guys.... i was kinda tripped up when i noticed that. JC need to change the sign or install it like it says triple color..

another question, you guys ever thought of changing tip where it would discharge like a fan spray? or is that even possible???
 
I found a tip I like - it's a 1/8" V-spray 1540 SS. It doesn't fan much, but it's a lot more than a stream. I tried the 2540 and I felt there was too much fan.
 
I checked the tips I was using and I was wrong. The 1540 was too narrow, the 4040 was too wide. I'm using the 2540.
 
You've got the wrong signage strip if you just have one tank. It should say foaming conditioner instead of triple shine. You can get a menu strip to change it.

I use a foaming rain-x type product in my single color system. It works great.
 
Etowah
H1/8U-SS2540 is the part number. Kleen-Rite doesn't list them in their catalog but they might order them for you. I get them from Windtrax.
 
You must log in or register to reply here.
Back
Top