What's new

Unique vaccuam issue

Cool Wash

Member
Joined
Oct 8, 2020
Messages
96
Reaction score
26
Points
18
Hope someone has a solution to this issue. I have ColemanHana vaccuam. When I was pulling out coin this morning, one of the vaccuams front cover plate would not open. I can hear key unlocked it and I can wiggle it but when I tried to pull out the cover plate, it seems stuck. Any idea?

Thank you in advance!
 

Rfreeman

Well-known member
Joined
Aug 4, 2014
Messages
761
Reaction score
439
Points
63
Location
Ft. Worth
Cover you mean vault cover?

If so you have a qtr stuck in there.
 

Cool Wash

Member
Joined
Oct 8, 2020
Messages
96
Reaction score
26
Points
18
Yes, it is the vault cover. I am going check it for the quarter. Thank you!
 

Rfreeman

Well-known member
Joined
Aug 4, 2014
Messages
761
Reaction score
439
Points
63
Location
Ft. Worth
Okay more than likely it's qtr. I've had it happen to me before when I forget to empty my vaults.

I usually take a hammer and tap on the front of the face of the vault cover while trying to remove the cover....eventually it comes loose.

Other than torching the cover for a qtr I don't know how else to get it loose.

Good luck
 

Earl Weiss

Well-known member
Joined
Aug 31, 2007
Messages
6,370
Reaction score
941
Points
113
Another option I'v ued is open the covr to the upper compartment remove coin Funnel to allow better access to slot and use a combination wrench thru slot to push from behind on vault cover. Tap with hammer if needed.
 

Cool Wash

Member
Joined
Oct 8, 2020
Messages
96
Reaction score
26
Points
18
Thank you again Earl and Rfreeman. Your suggestions worked. I was able to open It. Appreciate your help !!!
 
Top