AnalyticWash
Active member
- Joined
- Feb 26, 2020
- Messages
- 260
- Reaction score
- 229
- Points
- 43
I have seen it done outside the US.is that even a thing? touchless iba followed by a full service?
The labor costs would definitely be a factor.
I have seen it done outside the US.is that even a thing? touchless iba followed by a full service?
Automatic wash 24/7 never calls in sick!! LolCurrently we have 50 ft conveyor tunnel, about 40 ft building and 5 ft extended outside building on entrance and exit. Until last month before closing we were cleaning about 800 cars & over 1000 during pollen months. We didn’t had any brushes or Mitter in the tunnel. We were basically using hand brush with stick at the entrance for cleaning/scrubbing dirt and then send car in the tunnel for rinse. It was labor intensive.
We want to update our car wash tunnel.
Should we put mitter and side brushes or go with inbay automatic from Wash world?
Any advice would be highly appreciated.
Yes, well, it was for one client. He marketed touchless but in reality, there was a significant amount of hand prep with stick brushes, wheel brushes, yellow scrubbers and prep guns at the entrance and since it was full service, there was towel drying at the exit.is that even a thing? touchless iba followed by a full service?
Sure they do, when they break downAutomatic wash 24/7 never calls in sick!! Lol
...
WTH kind of an iBA only does 5cph?Automatic wash 24/7 never calls in sick!! Lol
Tunnel you have labor . You know your site better then anyone else. Inbay can only wash 5 to 6 car's per hour. 50' tunnel 20 to 25 per hour . I hope this helps
WTH kind of an iBA only does 5cph?
I got a Petit that will do 16 on top pkg & a Razor Edge that will do 13.
An Oasis Typhoon will do 20cph, on top pkg & wash the hel outta the car!