What's new

What coin acceptor to use?

mjwalsh

6 bay SS w/laundromat
Joined
Sep 7, 2007
Messages
3,134
Reaction score
173
Points
63
Location
North Dakota
Thanks guys. I will check those out. I only use quarters so I don't really need multi coin acceptance but I want reliability. Slugbusters have been pretty good. I really am not too impressed with Sensortron.
We had for over 25 years in our bays single coin acceptance with Parker's & GinSan's single coin acceptors with fewer than 4 problems with heavy use over those 25 years. By appearances & by what Doug Parker alluded to is that the GinSan is basically the same when it came to the single coin acceptor. Maybe just cosmetic differences ... not sure. Doug was honest enough to point out to me that their single coin acceptance acceptors were more trouble free. I do say while my first hand several years now experience with Microcoin QL in the bays is almost as good but not quite as good as a higher denomination single coin approach. Doug Parker had told me that it was just a matter of filing out the upper coin slot & putting the dollar coin in the comparative slot in place of the quarter to go that route.

For the less hostile environment wet wise outdoor vacuums we went the route of IDX simply because we liked the class c relay isolation of it & it turned out that they have outlasted the Imonex that we tested simultaneously with the used IDX. The used IDX 6 coin have been trouble free once we took them out of the wet inside self service bays & put them on the vacuums. They work in conjunction with the very reliable Dixmor LED7s.

Based on your choice of preferring to stay single coin the following is absolutely relevant IMHO! If the ICA & enough others in the car wash industry had stayed the course in letting politicians know that firm enough public policy relating to coin & paper $1 dollar bill replacement with it was & still is needed ... the single coin acceptors would have been & still can be a great plus & the best fit. Hopefully, it is not too late for the "best public interest served" worthwhile correction & another option for many of us ... it might only happen with enough unity among self service operators including us in the self service car wash industry.

Based on the extremely dynamic Coin Laundry Association forum ... numerous wise laundromat operators in all parts of the USA are going the single coin dollar coin acceptor route for a long list of reasons including not giving a blank check to whatever the current "norm" might be for merchant fees & latest potential encryption compliance updating requirements.

There will always be some who will ignore the better evidence though ... not just at their own peril but for the majority of others also!!! As always ... in my humble opinion ... of course.
 

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,665
Reaction score
3,946
Points
113
Location
Texas
Must have been quite some time ago because I've been here 20 years and we've always fixed them. We did not institute the 15 year cutoff until about 7 or 8 years ago.
Then either I'm mis-remembering or it wasn't explained to me very well, I just remember calling to get a RMA number and being told I couldn't send it for repair. I don't recall how long ago but it was 2003 or earlier.
 

Semi-retired

Member
Joined
Sep 21, 2010
Messages
44
Reaction score
0
Points
6
Location
Southern MN
Old slugbuster's were the reliable work horse for year's and switched to icoin for a couple year's to update until I had constant issue's needing to constantly reprogram and now micro coin QL.

The only issue I've had with micro coin is for some reason chute that accepts the coin always get's jammed with quarter's before they even get to the mechanism.
 

Wet Spot

Member
Joined
Dec 2, 2009
Messages
82
Reaction score
11
Points
8
Location
Los Angeles
I've had my micro coins for 10 years and no problems except for that the enitial plastic coin ramp for the mech. I haven't seen that one piece for sale, so I have to purchase the entire mech assembly unit for $30. I've had to purchase at least 8-10 of these for that one piece. Ironically I have to purchase another in the am. Short of this they are great, but please fix that flaw.....
 

Randy

Well-known member
Joined
Sep 5, 2007
Messages
5,844
Reaction score
2,178
Points
113
I've had my micro coins for 10 years and no problems except for that the enitial plastic coin ramp for the mech. I haven't seen that one piece for sale, so I have to purchase the entire mech assembly unit for $30. I've had to purchase at least 8-10 of these for that one piece. Ironically I have to purchase another in the am. Short of this they are great, but please fix that flaw.....
I don't understand what your saying? Do you have a link or part number of the $30 coin mech?
 
Top