Search results

Probably do but if it's priced like the other Zep products it will be out of the question. I tried to go that route for a while but couldn't do it. They were just too expensive.

I have been using Kleen Shield for several months and am about to switch. I'm using about 2.5 times more of it than I was with Element Shield and the results are not nearly as good. The ES is really really expensive so I'm not sure what I'm going to switch to. If I had a Rainx distributor close...

I just had such a concentration in my mix tank that the rinse would take forever to clear up. I switched the hydrominder and metering seems to be working ok now. I had a pretty big mess for a while!

The pump that is on there is wired inside the motor and to the board. Can we just cut and splice? Thanks

I keep forgetting to look ...

Do these things ever just change program on their own. I have a bay right now I just noticed is .75 for 5 mins. Is it possible it did this itself or did somebody have to change it?

No my JC unit has it's own fresh water tank that mixes with the premixed chemical. I had chemical that is supposed to be 600/900-1 mixed maybe 10-1. That makes everything soapy. I think I'm pretty close to having it regulated after dipping soap for an hour or so. It was a fun Sat. night! RO pump...

It looks like the problem is WAY too much soap in the mix tank. I drained it and am trying to get it back to normal. Of course right in the middle of that problem is when my ro pump took its last breath! Fun weekend!!!

I have much more soap in my rinse water than in the high pressure detergent mode. The only way to rinse is sfr. Any ideas? Thx

Just bought it. Thanks! Can an idiot like me change it or do I need an electrician? That should be in caps, IDIOT, no electrical skills whatsoever! That would be me...

I'm thinking the Dayton pump at the top of the page here is the one: http://www.grainger.com/Grainger/wwg/search.shtml?searchQuery=1+hp+booster+pump&op=search&Ntt=1+hp+booster+pump&N=0&GlobalSearch=true&sst=subset. I just need to make sure there is room. This one looks longer than the one I have.

How do I know which pump I need? Where can I find the specs? Thanks

When I cranked my 5cp's to 1200 lbs. they kept kicking the breaker in one bay. I had to back them back down.

My spot free is part of my Super Saver pump bench. Mine is making a terrible screeching noise every time it kicks on. Obviously there is something that is waiting for a beautiful sunny day after a snow storm to completely lock up. I assume it is the pump that is making the noise but am not...

Hey Diamond, Did you ever take that picture? Thanks J

It's supposed to rain tomorrow. I'll try to clean it. It only leaks when the door is up btw. Thanks

My exit door has an emergency open button. There is a tiny little hose that seems to be there to provide air to make this work. That hose had been slipping off and filling my control box with air (and unfortunately some water too). I put a zip tie on the little hose and it seems to be staying on...

I had a lot of trouble with the gray ones. I assumed that I just had a bad batch. Installed one yesterday from a different order so we will see.

Over the years I have not done a good job of keeping my Mac valves labeled on my Ryko Softgloss. Does anyone happen to have a photo of a well labeled manifold? It seems 90% of the battle is figuring out which one to change! Thanks

Diamond I would still love to see a picture if you have one. I'm not as smart as these other guys but I am having the same problem.