Search results

Are you able to log in online? Im interested in knowing what the website is like and what you can/can not do. My Cryptopay website is great and easy to use but the swipers suck. My Nayax swipers are good but there website is terrible.

Thats not so bad. Just wrap it in some Flex Tape!

Anyone have any experience with Aqua Bio reclaim systems? Im looking into purchasing a location that has this installed and I am not thrilled about it. https://www.aquabio.co

Exactly I was going to say they should be separate. There’s the output for the bay stop light and then theres the output for wash in progress light like you mentioned. Also fyi your drive forward lights should be separated too. There should be outputs for an entrance drive forward light and a...

Is this the I5 or XP? Also what exactly are your trying to do? I know you said you need to move a wire but why. Do you suspect a relay is bad? If so you can just swap the coil and not have to move any wires. The coils usually go bad not the bases. If a base is bad then yes you will have to move...

The relay coils are 24VDC and are triggered by the red wires on top coming from the processor. The bottom has a red jumper bar that is connecting those relays together. It is fed by a red wire with a "number 1" tag meaning it is 120V. Terminals 12 and 14 are your normally open and normally close...

Its not little police interest or the police are ignoring the issue. The problem is the world is so brainwashed from "defunding the police" movement that they keep the little resources/officers they have left for more serious crime. No body wants to be a police officer anymore and you can't...

Large vehicle bays need to be 14' tall. I believe legally the tallest vehicles on the road are 13' 6". I have a location with 5 - 14' clearance bays, automatic, and touchless large vehicle wash. I put clearance bars on 3 of the 5 bays and limited them to 8' due to the amount of mud and grease...

Have you tried calling Hamilton tech support? The controller has nothing to do with the printer cutting paper.

Looks good but those zip ties will never hold up plus your hoses are going to wear out fast since their sitting on those metal cross bars. Install some Uni-Strut on the cross bars and use some Cush A Clamps to secure the hoses. Thats the right way to do that job. It will last forever.

I tried the purple passion once. Complete waste of money. Tip sizes are completely inaccurate and chemical falls out. I left a one star review on keen rites site. It was up for a day before it got taken down. There review system is a joke. If they don't like the review then you won't see it.

Two typhoons can do what 4 wash worlds can and you don't sacrifice a thing when it comes to cleaning. My top wash is under three minutes. Faster and cleans better then a "mini tunnel". Last weekend I ran 250+ a day per machine. Walk in the park. I agree stay away from employees. You don't need...

Ya 35 feet is just stupid. After 20 ft of loading that leaves you with 15 feet for equipment. How much can you possibly squeeze into 15 feet? one Mitter, set of wraps, and 1 dryer arch back to back. It will never clean. There is also no drip zone. The dryers will be blowing water and soap back...

Was it 35 ft or 60ft?

wow good one. Your groupies be on board shortly.

Do you live in imagination station? Like I said a average car is 15 feet. What equipment can you possibly fit in with 20ft remaining after the prep area.

Is this a joke? Average car length is 15 feet FYI just incase you don't know how to use a tape measure.

Yes you can just open the doors and kill the power if that is all your trying to achieve. A lot simpler then wiring it up. I don't know what type of doors you have but all newer door controllers the open signal will override a close signal for safety reasons. If you do wire it up like I sent you...

You can order a floyd bell and have pre recorded messages. You can activate it with smart plugs from your phone. You won't be able to hear customers or talk back though.

The hardwired Ring devices are hardwired for power not internet. There is no ethernet spot. Would be nice if there was.