Search results

I use hi/lo. My ArmorAll rep set it up that way. I have three black vehicles, and it does great on all the various dirt/grime my vehicles have seen. Black will certainly show it if not clean. Therefore, I feel no need to change it.

I turn pump on, then use the garden hose to force water through the entire line from the suction end to a few feet on discharge line. Once it is full, then I drop suction line into chemical and purge. This has seemed to work perfect. I, too, found they will not prime their self.

Big blue 5 micron. Mine is 10 inches. Less than $10 from Kleen-Rite

I will take the Procons over the Flo-jets any day.

Anyone had the rear wipers on these pos vehicles break? Rest position for the wiper is in the vertical position. What fool do you suppose came up with that bright idea? Brushes wrap around the back and break them right off. Every single other rear wiper rests in the horizontal position. I...

But what is the sequence for getting into the menu to change them? My book has the list of standard recipes, but does not tell you how to change them.

I just received a call from TSYS. They said they have teamed up with Hamilton to provide the best rates in the biz. They say no more than a final realized percentage of 3.5-4.0. I have a couple with Global Payments averaging 9%, and one with NPC averaging 8.5%. Has anyone used or switched to...

What is the sequence for getting into and programming recipes on a WW 1.0? Special code? Thanks in advance.

Plan is---it will be someone else's problem in 20 more years :cool:

All my washes have ribbed plastic underground tanks for ro storage. 1500 gallons. Oldest one was built in 1992. No problems so far.

Did anybody see this? Another strange story. Yikes! http://screen.yahoo.com/122-000-bentley-wrecked-car-231504625.html

They come in 200 watt, but I do not think it will fit into your wall pack unit. I converted some 1000 watt MH lot fixtures to the 200 watt cfl. But those are big boxes.

Had it happen with some product I used a long time ago. I just put 1/2 bleach-1/2 water in a spray bottle, sprayed it on the car , let it sit 5 minutes or so. Then ran them through the auto, minus 3x foam, and stain would be gone. Got rid of that product right away; as I was just experimenting.

The Grainger pump is $302 + $76 for the warranty for gives you an additional 2 years past the mfg 1 year. Then the replacement is good one time. I have used it on their other motors. So the KR pump cost is $246. Typically it may or may not fail within 3 years, so if it does the repair is...

Changemaker Services in Florida still services them, too.

I have one of these units. It was installed in 2005. It is working just fine. The most important thing to me is keeping up with ozone & oxygen generator maintenance. Those two items must be in good working order to keep water from smelling. I use the unit on two friction automatics. As far...

Randy-- I agree. The small pumps are not worth the rebuild. Just the series 4 and 5 with 1/2 inch ports are. I should have clarified. When I need the small pumps I usually check eBay. Sometimes you can pick up new ones there for $75-90.

Yes, they are definitely worth rebuilding. Edco Distributing in California rebuilds them. For $90 you will have a brand new pump. ($120 if the rotor has to be replaced) That pump new is $245 from Kleen-Rite. I keep back ups of all my Procons. At my busiest stores, I just swap them out every...

You think you might have some trademark issues here? Since this is not a Mother's issued product, I would think they will be shutting you down fairly quickly.

I would be happy to accept some FREE samples, and provide feedback for you. I have 5 locations; 6 vending machines total.