Search results

Hold the sw1 button down 5 secs unplug ethernet cord then power wait 30 secs and plug back in. Had this happen before and this fixed issue.

Is the spray arch impact happening in the same position as the arch goes around? Mine used to do it all the time after 3foam it would kick the arch back about 2 inches ended up being a bad gear box.

Same here. I'm just wondering how they have the authority to do so. I have full pressure at both my washes. I'm furious 🤬🤬

Have my cash/coins set to $3.00 for 4min 30 secs. Have my cc set with count up( best change I ever made going count up) to $4.00 for 6mins. Southwest Louisiana.

Seriously. Never ending. Stuff is slowly thawing but now the city has no water pressure.

I'm in Lake Charles La and mine has yet to thaw out. Weep system is frozen tomorrow will be day 4. Very unusual weather for Southwest Louisiana.

Totally agree. It's convenient but not worth 10k worth of damage. I have begun adding cryptopay tap units in place of bill validators.

Deep blue concentrate from KR works just fine.

Your coordinator must have been disconnected. I have had this happen and when I went to view site status the coordinator was offline. Did a reset holding down the sw1 button unplugged power waited 30 secs and it connected. 2 hours later all transactions posted.

Awesome good to know that thank you!

I have my doubts as to the usefulness of oiling the wicks considering the 310 and the 5cp use the exact same seals, and the latter doesn't have wicks at all. So the 310 and 5cp seal kit are the same? I have a bunch of 310 seal kits from a wash that was taken down from hurricane Laura. Can I...

What I did was got a sign made saying Change for carwash use only. Then a made a sticker saying this changer dispeneces a mixture of coins and tokens that can only be used at this wash. I also turned off $20 acceptance. I do have bill validators in bays and vacs but all are wirelessly armed...

I also switched to glow foam and it is a extremely vibrant colors. Works great customers love it.

I got a local sign company to make little stickers to put on the cryptopay button that says 🛑 stop.

Definitely was the solenoid. Thanks

Update. Turned up the air pressure on tire cleaner and now coming out in 8 seconds every bay. One problem which I'm sure I know what its going to be is that tire cleaner is continuously coming out of bay4 when bay is stopped. I'm guessing stuck solenoid or bad check valve above bay.

Thanks mep I truly appreciate your feedback.

So what do you recommend having chemical and air set at on tire cleaner and pre soak? Right now I'm at 40 chem 20 air

All mine are separate. I will try turning up pressure. Crazy cause foam brush is fine just pre soak and tire cleaner I'm having issues with

What about if your tire cleaner, and pre soak are taking way to long to come on? Like 30seconds or more. Have replaced all the regulators on tire cleaner and pre soak. Have not gotten on the roof yet to check the check valve. Ginsan equipment!