Search results

Anyone have issues with Infiniti antennae cover?

So, will 20 amp work. Seems to be what I am replacing and there haven't been overload issues.

So, the Transformer for each Bay is 100 VA will that handle 2 40 W Heat strips plus the Timer, coin Mech Bill accepter card swper etc.?

If trough needs to be insulated an HVAC Contractor can probably make one and you can use ridged insulation for top, Sides and bottom. Paint or undercoating type covering may prolong life. Plywood - Painted might last a log time. Perhaps cover with roofing material.

Each bay has it's own transformer. I will look at label to see. what they are.

Need to replace some coin box heaters.. Seem to be available in 20W-40W. How do I know what my 8 bay system will handle? Note I run 2 heaters in each bay. One for Coin Box and one for Bill Box.

Have you contacted Erie?

My rule of thumb has been LED 1/3 wattage approx of MH replacing - has worked for me.

Since you hired a lawyer who specialize in eminent domain actions he will argue the value is based on many things including the income a property generates not simply the type of structure. There can also be a "Uniqueness" factor argued.

Is it a Viton Flo Jet?

Erie Brush. Order size you want. Original sizes may or may not be optimal for your equipment configuration. I had to shorten some cloth to keep it from getting caught in Wrap around that preceded or followed mitter. Note, the top of the cloth may be looped or may have a plastic strip that...

I have bought dozens in all lengths. Some have 3 rows of LEDs and some have 2. I have used it under vac Island canopies but would not use in an SS Bay. I have some that burn 24/7 under a canopy and they last a couple of years.

Then it would seem you have liquid to solenoid but even with voltage they are not opening. Can you see if coil is actually "Energized" - see if something metal like a screwdriver is attracted to it. If so likely plunger inside is gummed up. You can carefully take apart and clean to make sure...

Do you need to heat the trough or are you in a non freezing climate?

I order for 4 locations. Probably a full pallet 3-4 times a year for each - no assigned rep from KR.

One of my SS Pumps keeps blowing the plug out of the pressure gauges. Until that happens pressure seems Normal at 1300 PSI. IS unloader not dumping pressure fast enough when someone releases the handle on the gun or something else?

I have used "Best Of Signs" with great results and Fast Service.

I put New Signs on Bay Dividing walls sayin "THESE BAYS TAKE CREDIT CARDS" Did you ad any additional signage?

There is a difference between being "Cheap" and being "Thrifty" Thrifty is what I do. Cheap is what you do. :)

Note that if you go with 3 motor you may need to upgrade wiring and breakers to handle the load. I have read the specs about diminishing returns vis a vis how much you can suck thru a 2 inch hoe with 3 motors vs 2. IMO there is little to no difference between properly maintained 2 motor vas...