Search results

My Opinion differs on a couple of items. 1. I use non working swivels where the hose attaches to the boom swivel, and working swivels at the gun / foam brush end. The non working swivel makes the install easier than no swivel. Working swivel t gun / foam brush handle makes use easier. 2. I...

I have 18 Cameras in operation. Started out as a lower res system. Went to 1080P with same wiring. Original system was Q See system with the much smaller gauge wire. Some 1080P cameras did Ok with it. Some bad from the get go. Now 3 more need to have wiring upgraded. 1080 P is...

I think that is same spec. (Great Price - Thanks. 20 AWG ) for the coax and 18AWG for the power. Only concern is if the "IC" denotes some sort ofsshielding whcih may be important if the car wash environment.

No gates m- Just Keypad.

Anyone have good source for Siamese camera cable. Current supplier provides "IC20 AWG & 2C18 AWG. make lenghts as needed and put on the BNC connectors for cameras.

I would star with 40PSI for the flo jet and 10 PSI for the air. You do not need much air for foaming. Increase air 5 PSI at a time from there.

Perhaps there is a reason most washes use mechanical fasteners for FRP? (Not Glue)

Are you going by the white face gauges or the Black Face gauges? I hope it is not the white ones. Use the Black face ones for the settings and ignore the white face ones. (Sorry if "Black Face" is not PC:)

Does any one use anti seize when replacing parts that they know will wear out in a couple of years like Takeup wheels?

There are forward throw lights you can mount on the building high enough so thy don't get in the customers eyes. One of these - 400W equivalent will do the trick.

I may have to call them once a year or so. But when it saves a day of downtime it's worth it.

Had issue with crud in NO weep Solenoids causing them to leak . I typically use mesh strainers but decided to try a whole hose water filter which will catch finer articles. Having a Home Depot across the lot makes me try these things. I will see what happens.

I now take the quick and dirty way for most footage I want to save. I use my I phone to film what is on the monitor.

No issues with tape. Less mess. Then again rarely go to 1.5" or larger.

Last year was the first year I did this compared to hot liquid loop and it seemed to work much better. Highly reccomend it.

1. I do not change pressures. 2. Varies. Per 5 Gal about $40 for AF and $80 for regular. But regular dilutes at 320 / 1. Lets use Beige as average and that is 8/1 . At 160 to one application cost would be about the same. At 8 to one you are using 20X as much. So 20X more expensive. 3...

You need more signs. One that says "Read the sign" And one that says "Read That Sign".

I use pebble finish FRP. Pebble finish is not amenable to the Graffiti scratches. Haven't seen anything better. Won't get dinged like hollow core PVC.

I had the Dema 0474P and they lasted a few years but then wouldn't close. So, I just tried the Dema SODO464PS24 and that is the one that got hot after a few days and kept running although I found some crud in it and I am going to put in a "Whole House" filter in line to prevent this. I see...