Search results

Heed Kevin James advice. Nothing like getting a lot of $ for your effort to encourage the thieves. Similarly getting little or no $ for the effort will dissuade them.

I don't pay extra for any anylitics. I don't do receipts. I only have SS Bays, no IBA. I rarely go to their site, but if memory serves it provides detailed info about charges at each swiper. I really don't see the need for anything else.

I only use cobalt these days. The extra money you spend up front pays back in saving time and aggravation. If they get dull a "Drill Doctor " brings them back. If you dull a few larger bits the Drill doctor pays for itself in sharpening them.

I use KR Low PH for my SS HP. I do not clean the lines. Every once in a while due to foaming in the mixing tank as bubbles burst they leave some residue and I have to clean the tank. In the Tunnels which get much more useage i clan the foamer foaming media about once a year. That's it.

I advertise my Superbay at 1250psi. It's probably at about 1300 but i want to be sure i don't over promise.

You could likely get replacement parts from Coleman. You could add a lock bar and lock that covers the keyhole and plate. At the least you would have to cut slots or holes in the sides of the box. Coleman provides a high security setup for this on new vacs with a housing on one side for the...

I only clean those type of Filter Socks when motor needs replacing or if there is an issue. Most motors have quick disconnect blade type terminal so this should not be that big of a deal. If you have some other type you could make it so they are quick disconnect.

Similarly I am amused when people never try other stuff and may be paying triple what they need to. I must have tried at least 100 products. 95 gave good results. 90 gave good show and results. A couple had mixing / solution issues. So, for 90 out of 100 it came down to cost.

HAd Dema NO a few years now since I put in the then new weepmizer. So far no issues.

Gave up on the PP Pre soak a while ago for this reason. i now use their Low PH soap as the pre soak.

Also what product do you use and the "cost Per car" . Figured I might tie it into my Tire chemical application.

And what pray tell is the make and model of this wonderful animal? Sometimes stuff from 25 years ago was built better than stuff today.

After a while i had so much back up stuff i jsut built a back up wash next door;)

You may need a sign at the entrance like mine that says; "Read the Signs". Thinking of adding one that says "Read the Sign that Says read the signs".

Happy with Crypto. Ease of cost, ease of insulation. After 5 years one of the 8 swipers went bad.

Which light strips do you have? Which equipment are you referring to that is similar to the Belanger?

Since TSS sells many types of lights and sticks if you could provide exact name and model that would help.

The steak is the clean dry car and perhaps exceeding expectations. The sizzle ads something as well. Have had lots of comments on my Bubbler and initial color changing light. Some recent builds turn off ceiling lights when colored lights come on for more effect. Some recent builds are...

I would suggest: Meter Box decals Cover the entire Box. Bill Accepters. Credit Card Accepters. ould not tell - do you have foam Brushes?

Tried Blendco in my Tunnel. Did not like it. Too much stuff to mess with and issues with those items. I use KR super concentrates in the SS with ultra lean hydrominder tips. . Use HP for pre soak because I had Gelling issues with their pre soak. A 5 Gallon bucket lasts a long time.