Search results

Is the door hanging up on one of the door reset brackets? Does it have the counter weights that could be binding was the belt greased when put in? Have you tried leaving the door just off the concrete to rule out that it’s not freezing to the floor?

Is it all the bays or just 1?

I have been setting it up for high pressure. I think you use less because it goes on faster at high pressure. But who knows I could be wrong.

Glad to hear people are going up. That’s when I am making the move!

IMO I would not worry at all about having it in the bays and automatic. I have a few customers that have it in both.

I have set up a couple washes with it, works very good. I will be putting it in at my washes in the next week or so.

It sounds like it lost internet. It will store a certain amount of charges when it reaches its max usually when a card is swiped it will start for a second and shut off. The run light should have a steady flash.

What’s the part number on the sonar you are looking for?

I have had that problem before what fixed it for me was putting a piece of Velcro around the food to keep it closed tight

Lmao

It was so bad at one of my washes I switched to tokens. Problem solved

Ginsan hands down

Have you tried a different port and new cable

I have returned it many times

Single coin I usually go with a sensortron

Put a little oil on it if you got the set screw out you should be able to put a pair of channel lochs on it and turn it you probably have a burr on the shaft

I had a problem with some new units don’t know if it what you are seeing. Had 2 stop accepting coins even after reprogramming. What I did was put a zip tie around the door you can open up and the problem stopped. After that fixed my problem I switched to Velcro so it was easier to get at and...

Fell free to call me I’m not understanding what you are saying. 860-993-7979

I am 4.00 cash 5.00 minimum for credit cards

IMO go with the airlift XRS