Search results

What rotary switch do y'all suggest, from KR? This seems kinda overwhelming to me. It sounds fairly easy, but there is a $hit ton of wires! Will LED6 be a simple replacement & what about coin mech & my MEI bill validator?

can you increase your gpd, by simply adding an extra housing & membrane?

I have D/H TouchSelect 2000 Doors, for my SS meter boxes. What would you guys suggest I do, to replace them, whom to use, & about how much would it cost me? I take coins, MEI validator & Cryptopay right now, & would definitely want that put on the new door. Would it be easier to just retrofit...

what in the control board, more specifically?

Does it work well if you have all 3 motors running? I would think surely it would.

So you think it's not a contactor isdue, but rather something in my meter box? Any guess what it could be in that bay door?

Nope, pump is off & papers like everything is ok. 1st time to run, hp rinse stays on (even though it appears to be off & out of time).

1. Hp rinse shows to be off, & all functions work 2. Pump only comes on to hp function once selected, & can be switched to other functions (while time remains). 3. When was time is done, hp pump stays on for hp rinse (but that is not lit up on selection ).

I turn breaker off, whether I turn it back on, the motor / pump is off. Then, 1st customer. ...motor / pump is stuck back on. The bay had tripped the breaker for a couple days before this issue.

SS Bay #2, won't shut off when time runs out, or when Stop is pressed. It keeps running on hp rinse. I have to turn off breaker to get itnstopped. Shut it down for a day, turn back on, but same problem. Could it be the relay, in the GinSan pumpstand? If so, what makes it do that?

ScrubFree, oh man , here we go....

mine works great, & has all 3 yrs since I bought my used LW. I never have an ounce of trouble out of 3x foam. 1 of the 6 products is coming out a little runnier than the other 5, but not enough to warrant me figuring it out. Customers love it, it's a CHEAP buyup option, but it prolly doesn't do...

how much for a typical arch mount, w/ 3 producers, 15 hp?

distributor fixed it. It was x15 festoon bad wire. Only 4 hrs & $570!!!!!!!!!!! $120 for trip & $100/hr! But, it IS FIXED! Thanks Twin Distributing!

lemme ask a buddy, who has 2 older units.

where are you located?

mac, little more info...website, are they all over the US, etc...

entire canopies or just the canvas over the tops?

this is a pretty good thread. Thought I'd dredge it up...

lets compare friction IBA's: 1. do you need 3 or 5 brushes 2. dually capable 3. guide rails on the floor 4. features/functions 5. speed/quality of wash 6. looks: bells/whistles 7. anything else price...? What IBA's are tops in these categories?