Search results

Jeff, What size nozzles do you use and where can they be purchased? Thanks

In the past I have used my garden hose and prod until it breaks lose.

Good 20-25 minute drive.

Robert, Are you aware of any damage ultraviolet light would do a car?

Robert, Assuming this will work, I am surprised that someone in the car wash industry hasn't tried to develop a way to intregate into a wash system.

Robt, Do you know of anyone that has used this in a car wash application?

If the relays are the small black ones replace it, when they fail it is in the on position.

Buda, I was not too concerned about what the Internet thought more interested in what car wash owners and operators thought.

I understand were you are at, been there. Best way I have found to check the proxy and cables is to watch the lights on the boards in gantry panel (ID16) ect.make sure the right terminal lights when the proxy comes on, have had shorts in cables before and found this way. Also check bushings on...

Was reading the latest issue of PC&D mag. and saw story on (dirt on carwash chemistry) by John Lenhart, he was talking about Polycyclic Aromatic Hydrocarbons (PAHs) and how they effect a car getting dirty and says in the article that the key to making cars easy to clean is to simulate the third...

Carl, By having the gantry come down to early sounds like the wheel count could be part of the problem, go to test cycle and have it do several wheel count test and see if the numbers come up the same, they should be within 2 of each other. Did serviceman check proxy on wheel counter?

How did you determine this to be a problem related to a storm strike ?

Have you checked your recipes to make sure something is not going on there?

I believe I would remove the passenger side cover on gantry and remove the high pressure panel cover, and go inside and turn on hp rinse and go back out and see what is going on inside the hp panel, I do not understand why the pressure changes unless there is a leak somewhere.

Have you tried to turn the high pressure pumps on at the test cycle on Red Lion ? If you have pressure with the test cycle on, I would think this would prove that the pump and hoses are ok. Then i would look at the recipes on the red lion. good luck

If this was me I would take all covers off gantry and turn hp rinse on at the red lion, go outside and see where the leak is. some time the HP hose across the top of the gantry will leak and you will not see it because the water runs down the inside of the gantry wall. Good luck

The wires that I am referring to go to the 4 yellow buttons ( wash select buttons) on front of ele. panel in eq. room

Had this problem 2 weeks ago. My problem was the common wire going to the yellow push button switches on the front door of ele. control panel in eq. room was shorting out , appears it had worn from the door being open and closed, they have plastic wire ties on them and is hard to see unless you...

I can understand where you are it can be a problem with the cold weather, but here in Florida we need any breeze we can get during the summer months.

Have need to replace the Gast air motor in my J C Coleman shampoo / vac combo. Was wondering if anyone has a alternative source other than j C Coleman, maybe there is another manufacture that is a replacement for the Gast?