Search results

Procon pump feeds to mini-reg, air also feeds thru mini-reg and out too bay

I believe the only differance is the size, most JC units have the mini on them.

I must agree with you Red Baron, no matter how dumb some people are it is always the wash fault. I always give them the credit but there are times I would like to tell them to just kiss off.

I just hold my old wheel beside the new one at the local hardware store make sure the same dia. use old plate to drill holes and go with it, has been working for 2 years.

Do you know if the LED-6S is still available, it is not on their web site? Sounds like a good way to go if available.

Randy, Have you had timers repaired by B&C ? I spoke with them about a year ago and was told they did not repair I would have to send too Coleman.

I have sent several timers back to Coleman for rebuild and so far it has worked well.

Have a $3.00 Express opened Jan . 2009, located about a mile from my 2/4 and it has had a 20-25 % effect on my wash, I really do not know if the change is because of the new wash or just the economy/new wash. The thing that I do not understand is how they can operate with 2/3 employees and open...

Sounds like you some foot valves bad.

I hope the tow truck drivers are better there than here, they give me the most problems with the grease and oils from the beds after towing or carrying a wrecked car, trying to dry grease off tile walls is a job.

Several years back I built on the back of my to add second IBA, the only regert I have is I wish it was a larger room. IMO, you can never build too large.

grant has a tech. named Michael, he has been of help to me in the past don't know if he is still there but he is the only one I have talked to that knows anything about there eq. good luck

For me this is one day at the car wash that I really enjoy and have the chance to meet some of the best customers in the world. Wecome them to the car wash never ask for Id thank them for their service

The reason for changing the eyes was because the cans were getting bad and I wanted to replace with new ones before they got so bad I would not be able to get them off. The eyes were working fine before I changed the cans.

Right now I am at G1, in the past I have been able to set them b1 and they work good there but for some I am having a real problem getting them that close now.

Keeping the car wash clean and the eq. working properly,is #1 on my list. It really does not matter how many bells and whistles you have if the place does not look clean and safe customers will not come. JMO

Just replaced the safety eyes and housings on WW 1.0 and having a heck of a time getting them adjusted , i am using the telco gauge but still having a hard time getting them close. Wondering if some one here has a seceret to doing this.

Can you exchange the display board with a good board and see if the problem goes w the board, if no try the sound board if problem still there it must be with the watrebuster or the control board in eq. room.

Have you tried to reprogram the boxes? Also check the two wires at bottom of box and make sure they are grounded, these are to shut meter down if they get wet.

Good job ScottV