Search results

Mkae sure there is no hole / leak in the supply tube. If there is it will suck air, run fast and not draw product.

Tore one off. Think a mitter caught it. But before and since 10's of thousands of vehicles washed without any similar issue.

Dang, out of stuff I listed I forgot this one. Some liftouts have the cylinder with positive action in both directions and some have the weight of the rollers drop the liftout / fork. If for some reason the liftout drops only part way or only one side drops for whatever reason this will cause...

My Experience: 1 Tunnel with Sonny's Spider wrap 901 Mitter configuration, 2 Tunnels with 2 sets of AVW wraps each. One Tunnel with one older Gen Belangers (Not Quick fire) and One AVW set. All can do a good job. No air Cylinders used on AVWs or Sonny's. Belangers work great but had to tweak...

Note to all. Flo Jets are great to swap out using te quick disconnects BUT!!! I have had that little white thing go bad. Swapped out for a new pump and it did not work. Made me crazy until I swapped out the little white thing as well.

I complained about this also. Seems the on line system estimates charges which may be higher than actual charges.

Tried some Warsaw polish wax . AFAIAC KR was better bang for the buck.

3/8" Plywood. Simple and Cheap. Leavbe ridgid foam sections on top of each plywood panel if desired.

The laundromat guy must luv you:(

I rarely disagree with MEP but with the door open the bad motor does not turn or is that why you told him to open the door. Also Colemans have a screen below the Motors. They can get clogged over time or if a Bag is Bad or not sealing correctly.

A story here goes that the owner let the employee have a key to te meter box to clear jams and maintenance issues. One day he came to collect outside his regular schedule. Reaches into the vaut and feels something like a cows udder hanging down. Employee periodicaly put a condom over the drop...

Are you looking to run the trench drain the width of the bay in the center? I would look at other locations and see what they do for ideas. I have seen older locations here with trench drains running the width. They must have stoped for a reason. One of the best Idea I heard of (Don't...

Anyone experience any issues?

Depending on how out of level it is if you create a form with 2 x 6 the concrete would self level for a pad and you could keep a 4" minimum depth.

If I were concerned I would pour a 4 Inch concrete pad with anchor bolts set in it (Make a template of the machine bottom. Throw some metal lath that they use in concrete into the form for more stability, and then bolt the machine to the pad. Maybe even make the pad higher on the sides and...

HAd a frozen coin drop tube. Don't know hhow long it was like that. After thawing literaly hundreds of dollars dropped out. If I looked at bay counters I'd be pulling my hair out till I found this. Aslo quarters that miss the tube. Counters are good for spot audits or if people have access...

A. You have a legitimate concern. b. HAs not yet happened to me in the SS and last time it was brought up others had the same experience. c. In the tunnel the setup has the controler open the soleoid that supplies the iar when called for. I am sure some here are more knowledgeable than I and...

FWIW I do not and would not use foam generators. I use them in tunnel applications and they get gummed up over time. With the bays, having the soap and air mix for 25+ feet from over the bay to the brush is plenty of foam making time. (I use an Erie 6 hole brush)...

Not sure of the WEG Designation but had a new install blow 2 because the new motors are wired differently that the old ones and the electrician had done lots of blower installs. This was about 2 years ago.

Otehr issues aside I can see why hose connectors should be weak. Same reason gasoline dispenser hoses have break aways. You don't want the unit dragged down the street if the hose gets caught on a car.