Search results

I have a flat metal roof at the wash. I don’t have an attic. I’m not really a fan of mounting the motors in the bays. Has anyone ever mounted them on a flat roof?

Who has them? My current setup only uses air regulators for each function but there's some irregularities among the product in different bays. Some bays tend to foam a little more and some a little less. Would adding flow meters on each function for each bay allow me to really dial everything in...

Is all media the same? Is there any need to replace the gravel?

I’ve got a twin head softener from Velocity Water Works. I need to replace the media and gravel. The shipping for 3 bags of media and 1 bag of gravel comes to almost $600. Shipping is as much as the actual product. Where do you guys buy your media from? Is that shipping cost normal?

80, I also use a foam gun for all of my low pressure function but my tire cleaner does not foam anywhere near as good as yours. I’m not using any kind of foam generator. In your opinion does that make a big difference in foaming ability?

Follow rands advice. I had the same problem recently and had to redrill a few mounts except mine are inside the vacuum. If you have to reposition be cautious of incoming power. You don't want to scrape of the exterior jacket or pinch it when repositioning the vacuum.

Jim, Did you ask him about the possibility of replacing a panel if it was damaged?

Randy, Do those push lok fittings you linked above have a threaded end on them that I can screw directly into the regulators?

Can hollow core panels be easily replaced?

I’m trying to install some push lok hose. I’m having the hardest time getting the hose pushed all the way up onto fitting. Does anyone have any tips? Is there a tool that makes this easier?

I believe it's an ac1005. Im hoping I can use the parts in it as backups. Should I cut an extra inch on both length and width?

https://www.kleen-ritecorp.com/p-6836-american-changer-ac2225-rear-load-high-capacity-changer-with-mei-validators.aspx

Did you cut to exact dimensions or a little larger? I was thinking maybe an extra 1/4 inch on height and length.

I’m installing a new changer at the wash. This one is double size of the old single unit. I have to cut out a bigger hole on the block wall. Do you guys any advice? Should I cut the hole a little bit larger that the changer to provide some adjustment? My current changer is anchored on the back...

I do but whenever I fill it to the top it has a tendency to jam the hopper.

I’ve got a single AC1005 unit that on busy days gets emptied out. I’m wanting to add some more capacity but I’m not sure what’s the best solution. The cheapest would be to add another AC1005 side by side the other. Has anyone ever done this? If so how did you mount it? My other option is to...

Randy, I checked the screen and it looks pretty clear. I have good flow before the entering the Hydrominder. I believe my constriction is coming from the minder.

I’m having problems with a Hydrominder. The water pressure coming through is barely noticeable. I’m not getting any chemical pull through do to the low pressure. I took it apart and the valve is in pretty rough shape. I’m thinking this is the problem but don’t have a replacement confirm. Anybody...

Should I install an overflow protection at the top of the tank that plumbed into a drain in case I have a float malfunction?

Is it normal for the system to still have pressure on it after it’s kicked off?