Search results

Hi, We are trying to fix an old motor for a vinyl door that will receive the voltage on the Bd but nothing comes out, when opened showed signs of water damaged. Looks like an old Airlift Motor with the circuit bd in front. Does anyone has any PN or more info about this Bd? Thanks for any help.

Looks like you are working on a GT300 or GT500?. I would ran your presoak line directly to the side manifold only (no Y for the hubscrub). Purge the presoak with the chemical line disconnected on the T that mixes with water, leave the check valve connected on the T, and make sure that check...

Let me know if you still needed, I may be able to get one of those.

I have been a carwash tech for the last 10yrs, mostly serviced Mark VII, but also some PDQs and Ryko. You guys are pretty much correct about the confusion that generates on customers who prefer a touchfree a ChoiceWash with brushes. But, also I have noticed that it depends of the type of...

For the Telemecanique like XS618B1NAM12 (treadle sensors) you can use the 6YB38 or E18018, Grainger sells those ones, but probably you'll get them cheaper on Ebay.

It depends, if you know the part number or the specifications you can get them on Ebay or a replacement online. What kind of parts are you looking for?

After the boom goes down at the front of the car, does it make the tilt towards the car? Then, when the boom goes up and the Gantry goes to the back, is the Stop light flashing or steady? If is flashing, at the end of the wash the CMI will show an error code, what was that code? It could be...

Never saw that system before but almost all door systems has the same principle. 1. If your doors are close and somebody punch a wash code and the entrance door opens, that means your CW system door controller is sending the signal to the entrance door. Now, if it doesn't close by itself but it...

How is the plumbing on your Cat Pump? Check the outlet, if you have a recirculating adjustable valve that takes the extra pressure back to the cat pump may be broken. Can you post some pics to see how is the outlet line at the Cat Pump? If that happens with the UCW and the machine, seems to be a...

Great! But for $299 now in Home Depot you can get a Qsee 8 channel 1TB Hard Drive HDMI port and 4 Cams 700TVL, and the very best tech support from QSee. Only problem is that even with a 700TLV you won't be able to see a nice face o tag number unless is in straight line within 20Ft, and that's...

Which one?? The straight or angled one. We got a angled one in stock, let me know where are you located so We can send you an estimate.

Hi, anybody who has some issues with a Mark VII Touch Free or SoftWash Rollovers units and need some help, let me know. Also if you are in need of some parts or need to find out a part number, let me know. I'll try my best to give you some help.

Do you have a picture or the part number? I may be able to find new or used parts for this machine. Send me your email and let me know.