Search results

Thats what I did as well, used a dc converter its running on 12 dc now. We sent back the original unit that i never was able to show any life. There's a good possibility that it may have been faulty from the manufacturer. I was not going to take any chances on the second so we switched to 12...

don't. 24.1 is too much according to their tech people. i had one burn up with 28 volt

Actually I was asking if there is some sort of maintenance requirement for blowing off the greese on the hitch...somehow my text got cut off. Didn't even wash the truck... went to 2 different bays to find the most pressure,blew the greese off than left with it all over the walls ect. Good thing...

They were very responsive at first and i feel i have a common setup in emails he made it sound like i needed to tap into the coin acepter pulse wires. So i tried that to no avail. If you do this thier is no communication between the timer and the card reader. I dont know if they have actually...

What state?

Update : So we needed a power supply and i left harness hooked up. Put the dixmore pin 6 black white wire with normally open labeled wire. Everything works as it should except stop button does not stop unit. Gave up and put black tape over it. Anyone ever figures out the right combo let me...

Waiting on the sign company to get off vacation. No signage yet but small town put it on the ole face book.

Finally after many trials and tribulations we managed to get our nayax up and running. We've had it up since monday with a grand total of 1 person using it all week Lol

Finally got the pieces that i think i need to get into credit sales. My first Nayak balked at the 28 volts running in my system and never worked. Got the replacement last week coupled with a external stop button,and power converter. I am using a microcoin with a led 6 timer. Nothing else. The...

as an installer have you had any experience with with the xcp power supply and stop button? i like the concept.

And that it is obviously my fault and not warranted. I always wanted a $300 paper weight.

Got ahold of nayax they are telling me that the voltage probably fried reader. They say that it can take a maximum of 24 volt. They say actually that it can run on 12 volt and sugested a relay to protect device from any voltage spike. My bench 24 volt converter is putting out 29 volt. The tech...

Got problem fixed. It was the bonus time. It was set at the 9th coin and it was 0000 time so the 9th coin was not adding time. Adjusted it to 35 coins ( hopefully nobody puts that many in) and is working fine. According to dixmore having bonus time set @ 0000 turns it off ...but mine dosen't.

Thanks for the information I've had a ticket in all week.

Just installed dixmore led 6, when you start it counts coins as it should. After it runs and you add a quarter for more time it does not count the first one. The timer beeps but dosen't add time. The next coin adds time as it should. Do i have something off in the settings?

nothing lights up on board when connected to power, I wonder If its possible I have a bad one? i put a ticket in on Monday but haven't heard back. what's the best way to get your problems worked thru with these people. I don't see a # for support?

trying to fire unit up, it requires 24v a/c correct? I have no response from reader... I'm assuming that I've blown a fuse in it or smoked the internals. I used the 2 reds together to 24v and the 2 black went to neutral. nothing. I see xpc corp is selling a kit for the nayax reader that...

Figured most our issues out. None of the parts were bad. Ended up not using the connection directions that are exclusive for the Dixmor and used the the connection for a regular timer and it worked.

Nothing registers. We tried both coins.