Search results

UPDATE: I'm almost certain that its the contractor or the Contact Blocks on it. Comparing to other doors I noticed the blue switch on the Contact Block (https://www.eibmarkt.com/cgi-bin/eibmarkt.storefront/5a9b504e004f3dba27564debae39066b/Product/View/NS0730405) doesn't come down when I push...

Thanks we switched them with another door and the same issue. Im thinking its the contactor thats burned

The operator is a Liftmaster EGJ which are pretty compact, i dont think that they have a limit switch

Hello one of the exit doors open when you pish the open button but it wont close when you push the close button. It stops when you keep pressing the stop button while opening but it will keep opening if you let it go. The only way to bring the door down isto disengage the motor and manually...

Update: The issue cam back, it was not the loose nut on the wheel. We noticed the prox cable (yellow 90 degree) was kind of loose. the nut on the cable seem to loose their grab after a while. So as the error was saying all along, it was a connectivity issue. We wrapped some ziplock around the...

thanks guys, while I was opening and putting the prox and wires back for the third times, I noticed the nut at one side of the wheel was totally loose. So I just had to screw the nut with an Allen key and BINGO. The error says the prox is vibrating, but its the wheel that was vibrating since the...

Hello, we keep getting that alarm which says drive wheel prox sensor #2 is vibrating or wiring is not connected. Usually we see the error when the machine starts the presoak and moves for maybe a feet and then sakes the customer to exit. I have already made the prox #2 pretty fixedin its place...

Thanks Greg, We did clean the eyes with alcohol and we haven't seen these error since. But yes I noticed some big trucks park on top of the rails sometimes, which could be creating this error as well.

Alarm 18: when profiling to front of car, boom safety eyes sensed obstruction. Alarm69: end of track prox sensed on rear boom pass

Hello, Its been a couple of days that we get these Alarms 18 and 69 on our Automatic machine Water Wizard 2.0. Wondering if some thign is wrong with the machine or its the customers cars. Thanks

Thanks guys yes there must have some debrit in bay1 solenoid valve. Opened and put it back on and bingo problem solved. But when i opened the valve there was water spraying out while no bay was working. Is it just to due gravity from the SF water in the tanks?

Hello, When the spot free in any other bays starts working, water comes out of bay1 gun as well. Is this a mechanical issue (check valve) or an electrical issue? Thanks..... I'm thinking perhaps the Spot Free plunger is left open on bay1...

Thanks guys but I don't think that its a programming issue as other bays coin collector works and its the same $2 as before, it just sometimes doesn't accept it. That's why I thought its simply a cleaning issue. I guess my question becomes, do we need to clean the coin collector on a regular...

its is a Magikist

Hello Good People of Autocareforum, Starting yesterday one of our self serve bays doesn't accept some of the two-dollar coins. One dollar coin is ok. Do I need to clean something? Or totally change the COIN ACCEPTOR? Thanks, Stampedecarwash