Search results

Thats way too complicated stuff for. Never raised the machine or chnaged the motor... asked someone to come look at it on Monday but my guess seems to be right that one motor is blown...it does feel like something is seized it goes backward faster than forward. Is there an easy way of unseizing...

Hello im getting this error and the machine is stopped in the middle. When i try to move it manually from the panel on the machine it moves abit but stoppes and one of the VFDs gives an error. It feels like on of the motors is blown?

Hello JCH asks for bi-weekly lubrication on most of the bearing... is that really necessary? First time I did it after 6 month...How often do you do it usually? Thanks

Hello, i run my pumps at 1200psi. One of them is a bit lower like 1100 psi. When i try to adjust it by turning the nut on the bypass/regulator, it will go up a bit like 50 psi but as i keep turning the nut the pressure goes down again. The regulator is brand new not sure why it acts like that...

Hello, wondering if there is any user manual to show how to do reports and stuff from DAN on an Hamilton system. Thanks Also is there any way to access DAN online remotely? So you can generate the reports while you are not at the carwash?

thanks guys, that's easy, just leave them alone ... it just every time I see a grease nipple I feel like I need to do something about it, haha

Hello, wondering how often we supposed to lubricate pump motors (mine are Baldor), any indication its about the time?

Thanks CEBO the collar on the wheel was loose, tightened it and we had no issues in the last 200 washes...

Im getting this error sometimes which says prox sensor on couting wheel don’t communicate properly. Everything works just fine and the error asks for mechanical adjustment. Do i need to just turn the counting wheel abit? Where is the refrence of this wheel? Or maybe one of the prox sensor is too...

FIXED: the problem is fixed and im so happy right now. It was the cable from prox sensor coming to the mechanical room which is almost 100ft. We came to know that by removing the last one meter of the prox sensor at the treadle and brining in to the plc (red lion) and saw that 2009-0 light up...

I did change the prox sensor to another one and the same issue...

I just checked the voltage on the 2009-0 and regardless of my car being on the prox sensor or not, it shows almost 24VDC. So I guess I do have the right voltage. So problem is not the connection? But shouldn't the voltage be zero when the prox is not active (sorry Im very naive when it gets to...

Thanks it all makes sense, I am checking the connection at the bay and for just a second I got the STOP light come on. How do I check the voltage at channel 2009-0? I do have a Multimeter.

UPDATE: I can confirm there is no signal coming to Channel 2009-0. I just checked the Channel 2009-4 which is for undercarriage and it lights up when I'm on it but it doesn't for the treadle. Whats is wrong???? I still cant believe the cable goes bad all of a sudden somewhere in almost 100ft...

Cebo whats ID16 or red lion? You mean the panel (PLC) inside mechanical room? I asked my staff to put their foot on the treadle few times but i didnt see any lights or something changing state in the panel inside. So bad wiring? How come wiring becomes bad all of a sudden? I noticed the cable...

Ontario i did have a similar issue a week ago. I noticed the prox sensor was too close to the plate and becase of that even when the treadle was not activated (no car on it) the lights on prox sensor was on. So simply adjusted the prox sendor and made it a bit further away from the plate and it...

Chaz i changed the prox sensor also changed its proximity to the treadle plate but doesnt seem to be that.

HEllo I have Water Wizard 2 and it keeps asking customers to Drive Forward, even after they are on the treadle (and prox sensor does light up), then when they keep driving forward, it asks customer to Backup, so they back up and then asking them to Drive forward and the same thing keeps...

Thanks, what is "prefilter"?

Hello good people of ACF, I had this carwash for almost 9 month now and never done a maintenance on RO system. I got a ColemanHanna RO system (https://colemanhanna.com/wp-content/uploads/2017/01/Reverse-Osmosis-Spot-Free-Installation-Manual.pdf). IS there any type of maintenance I need to do on...