Search results

Sounds like a programming issue. Do you have an operations manual? If not, you can download one from Unitec's website. You can also set up a time to talk to a tech if you need.

Are you talking about just the main display at the top of the unit? That says "Please select a wash" etc?

Diamond Wash has it!

Yes. You are getting some tri foam so there must be a restriction. Change your solenoid valve and I bet your problem is solved. I'd order more than one to keep on hand. It should be the same part that runs all of your chemical and they will fail at some point as well.

Any updates on your issue?

Sorry I thought you meant there was no tri foam when you manually tested as well. Sounds like a programming issue if it only doesn’t work during a wash cycle. The danfoss valves are your solenoid valves that your injectors are attached to. Yours may be a Dema solenoid valve. Not sure what...

148 psi should be getting more than a drip. Check your air and have you made sure it's not injectors or danfosses?

Your LP pump should be the one used for your Tri Foam. If you are putting out chemical on your LP passes but nothing on Tri Foam then I would check your injectors, danfoss valves and your solenoid. Also check your air regulator.

Check your check valve on your red presoak along with your danfoss and injector. Also your check valve above the manifold above your pump station. It's weird that it's getting into your tank.

Exactly what PEI said. I have a single bay with a Razor in a town of 90,000 and we've had 4 tunnels move in over the past couple of years and it hasn't hurt me at all.

Mine was doing the same thing and I backed my pressure down to just under 1200psi and it fixed it.

Oh hell. He just wanted his ladder washed. How much damage did that do?!?! After fighting with insurance they paid my total claim. Ended up about $9500 with loss of income.

That must have been quite a wreck.

I'm back up and running after a day and of half of labor with 2 techs from my distributor . No we'll see how insurance works out! What a week.

Yes hopefully parts are in route. I had to get a new trolley frame which I pretty sure they had to make.

I do have video, but don't want to defame the HVAC company since their name is on the vehicle AND employee's shirt. Yes he got out of his truck and looked at my height bar (that was on top of his ladder rack) several times and studied the situation for a few minutes before he decided it would...

I have already ordered all parts to fix the damage. It has to be fixed no matter what. How did they pay on loss of revenue?

Well this is my 8th year owning a wash and had my first major catastrophe that was caused by a customer this morning. A real genius tried to wash his employer's HVAC company ladder truck. It did quite a bit of damage to my Razor arch and trolley. I have it all on video and a witness. I have...

Can you post a picture of it?