What's new
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Need Help!

KyWasher

New member
I am trying to find a replacement transformer for this D/H unit but having a very difficult time finding any information about it. If anyone has any information that could help, I would appreciate it! image4.jpeg
 

Attachments

  • image3.jpeg
    image3.jpeg
    1.6 MB · Views: 20
  • image2.jpeg
    image2.jpeg
    782.8 KB · Views: 20
  • image0.jpeg
    image0.jpeg
    773.7 KB · Views: 17
  • image1.jpeg
    image1.jpeg
    1.1 MB · Views: 16
That looks similar to some we used to use. The secondary is a two taps. Purple is 24 common, Red is 24 hot if you have 230 on the primary and the red/white is 24 if you have 208 primary on ours.

I'm not familiar with the primary wire colors. Is there any markings on it?

Is the one with the 220 single phase the same transformer? Looks pretty large. Can you find a VA rating?
 
That looks similar to some we used to use. The secondary is a two taps. Purple is 24 common, Red is 24 hot if you have 230 on the primary and the red/white is 24 if you have 208 primary on ours.

I'm not familiar with the primary wire colors. Is there any markings on it?

Is the one with the 220 single phase the same transformer? Looks pretty large. Can you find a VA rating?


We couldn't find any other markings on wires etc. To my knowledge this is the original transformer. I've tried bringing it to a local Eletric supply house but couldn't figure much on it.


Ty for the reply
 
Last edited:
If you know you need 24VAC output and know what voltage/phase you have for input then you just need to estimate the VA rating by its outside dimensions.
 
Back
Top