What's new

Need Help!

KyWasher

New member
Joined
Aug 24, 2022
Messages
16
Reaction score
2
Points
3
I am trying to find a replacement transformer for this D/H unit but having a very difficult time finding any information about it. If anyone has any information that could help, I would appreciate it! image4.jpeg
 

Attachments

Dan kamsickas

GinSan Technician
Joined
Aug 31, 2007
Messages
705
Reaction score
942
Points
93
Location
Grand Rapids, MI
That looks similar to some we used to use. The secondary is a two taps. Purple is 24 common, Red is 24 hot if you have 230 on the primary and the red/white is 24 if you have 208 primary on ours.

I'm not familiar with the primary wire colors. Is there any markings on it?

Is the one with the 220 single phase the same transformer? Looks pretty large. Can you find a VA rating?
 

KyWasher

New member
Joined
Aug 24, 2022
Messages
16
Reaction score
2
Points
3
That looks similar to some we used to use. The secondary is a two taps. Purple is 24 common, Red is 24 hot if you have 230 on the primary and the red/white is 24 if you have 208 primary on ours.

I'm not familiar with the primary wire colors. Is there any markings on it?

Is the one with the 220 single phase the same transformer? Looks pretty large. Can you find a VA rating?

We couldn't find any other markings on wires etc. To my knowledge this is the original transformer. I've tried bringing it to a local Eletric supply house but couldn't figure much on it.


Ty for the reply
 
Last edited:

OurTown

Well-known member
Joined
Nov 8, 2017
Messages
3,653
Reaction score
1,413
Points
113
Location
Ohio
If you know you need 24VAC output and know what voltage/phase you have for input then you just need to estimate the VA rating by its outside dimensions.
 
Top