Search results

Where are you purchasing your tape for the rear wiper blades of vehicles? Thanks

Yes I have it and love it, so much so I am on schedule to add another producer so that I have 2 and I am going to put a duck bill on both which will make them one producer

In your experience which is better and why? I am currently using Simoniz Prep and I would love me something that breaks the bugs down better.

What percentage of sales does this equate to if you have an Express Exterior?

DRB is excellent, they work on your issue as soon as you call, and stay with the issue until it is resolved. I am so glad I spent the extra $$$ because I here horror stories about ICS.

Does anyone use a low pressure bug spray to help get bugs off. If so what chemical do you use in it?

Yes it moves the water from the top of the car very well.

I would take a hard look at your chemistry. I found out the hard way that getting the soaps rinsed off is as important as applying them. In a short tunnel applying a lot of foam and trying to get it rinsed quickly is very difficult. Cars will not dry well if the soap isn't rinsed and removed...

I figured it out. thanks guys.

Does anyone have a mitter curtain after their hot wax like me. I have a rinse on my mitter and the hot wax continues to build up in the mitter. I have the microclean cloth on it. I am seeking solutions to stop this.

Also if you are using the shower heads get away from them and move to the 80 degree nozzle foam generators. You will cut your chemical consumption 60 plus percent and get better coverage on the wheel.

hKim, More than likely its your wheel cleaner. I have the same set up and get 95% of wheels very clean. There is the exception of caked on dirt but 95% come clean. I say 95% because you shouldn't expect anything better than that without adding manual labor. I took Earl's advise and moved from a...

I had this happen to me a month ago, more than likely you have a small hydraulic oil leak somewhere. If you are noticing it on the glass its coming from above.

I'm not exactly sure off the top of my head but I believe about $640. What are you running the bead up on and what ratio, I think I will buy a 5 gallon and just try it

Hkim310, Have you ever tried FC3.

Earl, what tip are you using on your Hydrominder and what flow rate are you using with your nozzles in case I give this product a try Thanks

I am just curious to see, what you guys favorite drying agent is. I am currently using FC3 and I want to see if there is anything out there worth me testing. I do have Hot Wax which is excellent as well. Thanks

The start up amps spiked to 100 then fell down to15 amps immediately.

The problem has been going on for months. It's a brand new motor, my wash is in its 7th month of operation. The motor specs an 18 amp draw, I have the breaker set at 25 amps and it still trips I think I am calling Suncoast tomorrow morning and have them send me new overload and motor starters...

My top omni is tripping my breaker in the MC after running for hours every day. I have cleaned all of the nozzles, had an electrician check for loose connections, check the volatage which is perfect, adjusted the pressure and ran it in all of the ranges from 600-800. Does anyone have any other...