Search results

No bigger antenna, but I did use a larger Ethernet line and moved mine to a more central location. They do sell a repeater/extender if needed.

I actually got it fixed today. I called my water softener guy and spent so much time trying all of his suggestions with no luck. Finally I just studied the system thoroughly and figured out that it was the flush solenoid valve. It was staying open so the water was going out to the reject hose...

I use it for 2 sites and even though I only use it about once per month for the end of month reports, it is very convenient. Before I had to click on every transaction to separate my vac revenue. Now it is done for me. With only bays, it wasn't a big deal, but now all vacs have cc on them and...

More updates.. My pressure is dropping to 0 when the RO kicks on, causing the low water cutoff to turn it off. I verified that there is sufficient pressure coming into the system, good pressure after the small filter, and good pressure going all the way to the solenoid valve. I bypassed the...

To add to my last post since it won't let me edit, I also noticed that the pressure gauge on the RO was only around 50PSI instead of the usual 180 when it was running. The pressure gauge near the small filter would drop from around 50 to 0. Hopefully that helps.

I tried to bypass the cutoff switch, but don't think I did it correctly so I put it back the way it was. What wires do I need to combine to bypass it? BTW, when the RO was called upon to make SF water, I noticed that the low pressure cutoff activated. Thanks.

My SFR has been running perfect ever since you guys helped me get it going. Now I have an issue and had to shut it down, and have no idea where to start. I went into the ER this morning and the SFR tank was lower than usual, the RO system wasn't making more, and the reject hose was pouring...

I have a Dema NO at one wash and it has never had one issue. I replaced a GC valve with an Asco based on feedback from this site, and I have had to replace the diaphragm twice in it already. The repair kit costs as much as the Dema, so no more ASCO for me.

Been a while since I started this thread, but one of my caps broke off and had me thinking of just putting spray nozzles back on and seeing how they clean. I can't seem to find the originals. What size nozzle would you guys recommend for a rocker panel blast on the way in? There are 4 nozzles...

I bought all the tubing and fittings for my project from Orders freshwatersystems.com. Best prices I found and I have used them several times now. Got the idea from 2biz, and they have been great.

I have been using the Morton's Super Saver 2 from Sam's Club for 5 years now, keep my brine tank pretty full and have not had any issues with clumping or blockages. Can't beat the price either.

Yes, there should be a check valve under the holding tank going to each bay right before the 4 way fitting.

It's free... I personally use VNC Viewer on all PC's.

It has to be a learning remote, so I bought the cheapest learning remote. I think it was $20 or so at Wal-Mart. Then you just teach whatever buttons you want it to have. It will likely have 8 functions, so you just pick one and teach the buttons to that function.

Another great tip that has helped me alot is to have 2 remotes. I use the Dixmor remote myself and keep it hidden, then have a 2nd remote (cheap learning remote) that I taught only the power and number buttons to. That way they can only turn it on or off. With the Dixmor remote, it is very...

I have my employees use the remote and have been doing that for years. Enables all functions. I also have one of my credit cards programmed as a wash down card that I use myself. Just chat with cryptopay and they will enable it. You just have to use it once first.

No reason to week soft. I re-plumbed mine to weep hard water.

I've been thinking about doing that to get new floor heat intsalled, but can't afford to lose the 4-5" in bay height. Any pictures of completed pour overs would be great.

Black Ice, New Car and Pina Colada. I had cherry in most of them, but found that the cherry would keep making my plungers stick, so I just got rid of cherry. I use the Kleen Rite Oil based fragrance.

I would say credit cards as well. I added them along with bill acceptors by using the add on box JMMUSTANG suggested from Etowah Valley. On that note, I recently upgraded my bays to all in one meter boxes, so I have 4 of those boxes for sale. They are already drilled for cryptopay. I had six...