Search results

I share the breaker with my SS pump as well.

Thanks for the details. I already have a clear coat option, so I guess that is probably a similar function to the Rainshield but with different chemical applied. I was very interested when I hear "photoeye bayplate" as I hoped it was as you described. The one issue that I cannot figure out on...

Darin, can you explain what "photoeye bayplate, rear arm oscillation, RainShield and Color Wave options" are?" I have the rear arm oscillation, but am interested in learning about the rest. Thanks.

I put in six air Shammy's a couple of years ago and it was the best addition I made. People love them and they get use often. Once I added count up credit card a few months later, usage went up much further. People are way more inclined to dry the car when they don't have to add more $ first.

I would recommend keeping them as far away from the trip catch as you can. There isn't much room, but make sure you put them slightly to the right to avoid them catching on that.

:) One small disclaimer, since I sell the most out of the spiral vendor and not the drop shelf, I only fill them about 3/4 the way up...

Other than my spiral vendor, I also sell these in 2 Laural vendors. For those, I just leave them folded in half like they come in the bag, the fold it over 4 times so that it is a rectangle. I then put it in on the drop shelf. No rubber bands, bags, or anything else. Takes 5 seconds per...

I used them for a couple of years by just putting 2 rubber bands on them really tight. It was hard to do and took time, so I just raised the price and started buying the blue ones from Kleen Rite that are already wrapped. I buy them when I get free shipping and not long ago they had a buy 2...

Diamond, I finally replaced my 573 with the Hudson valve today. After a couple of hours, I received a phone call that there was no water coming out of the spray guns. I about lost my mind, but it turns out that my maintenance guy had forgotten to turn on the shut off valve:) Anyhow, I see a...

I've been using black on white. Will have to try out clear tape.

I heat my presoak and wax. Paid a lot of money to fix my boiler so that the pre-soak would be heated and it cleans better then before. If you are slow then the tank will cool down, but when steady the water stays hot.

I use a P-Touch for labeling the prices for cc on my vacs, but they fade out pretty quickly. Work great away from the sun, but that's about it.

I wouldn't leave money in that long, and the hoppers should run out if you are decently busy. You really need to trust someone to pull the money and fill the changers at least.

Very sorry for your loss. May the Lord give you strength in this difficult time.

I've had the same exact issue in 2 of my vacs. Resetting the breaker fixes it for a few hours. Works fine in other vacs. Have you tried using it elsewhere?

Where is this validator being used? In a vac or bay?

One likely cause and the simplest to check is your spray tip. If it is worn, it will cause a drop in pressure. Replace that and see what you get.

This is my # 1 issue/complaint and from what I have been told, it is common among these machines and there is nothing you can do. I hope that is wrong, so maybe RycoCS can chime in. I love the machine otherwise.

I should have updated this earlier, but it ended up being the connection to the timer. One of the pins wasn't making good contact with the timer (the one for the compressor). so I pulled on it a little and now it works. Thanks.

No film or issues that I have seen. Worked perfect so far this winter with no FB freeze ups, but I do have to stay on top of it and change tips according to the weather. Red tip is only good down to about 21 degrees or so. I've had them freeze up at 19 degrees with red tip. Beige will get...