Search results

I have 3. I bought one and built the other 2 myself. Spray gun with brush. $1 per minute. They are used in summer and not so much in winter. I built mine with 2 solenoid so that after time was used the second solenoid opens and depressurize the hose and system. Without it system could be used...

I have a bunch of T5 HO fixtures that I run in my auto bays 24\7 and I have yet to replace a bulb. Going on 6 years now.

Be sure to get one with automatic backlash feature. Saved lots of money by not having to replace membranes all the time.

3 ss bays and 2 autos on acre of ground- property tax runs around $7000 per year. 6% sales tax but does not apply to car wash sales since they are considered labor and labor is not taxed in Idaho.c

Welcome to the forum. I look forward to your participation because that is what makes this place work.

I have found that wet towels work better but a glass cleaner towel with the word "glass" in the title sells better in the glass front vendors.

I had a long cold spell a few years back that let ice build up on one of my SS bay walls that was bare concrete block. One day the temps warmed up and the sheet of ice about 6 inches thick did come off the wall and then fall and hit a car doing about $1500 damage to the car. This was about 15...

I just ran down to check and Vegas is still there. Saturday I was on Lake Mead swimming, temps. were a little cool at 78 but that beats the teens I found when I got home.

The cost of using a rfid type system on a SS by could be a large barrier. From my research it cost between 10K to 20K to add it to a existing auto cashier. You would probably have a higher cost per bay to add it to a ss bay. Alternative methods might be needed. If you already have Credit card...

I give a few friends and family free washes but they respond in kind with their services or products. My dad used to tell me that you have to make money from your friends because your enemies won't do business with you.

You can ge the simoniz titration kit from Kleenrite for under $20.

Have you titrated your chemical for final dilution? Your application seems about right for cost per pass. You should be cleaning well at the 300 cars per barrel rate.

I use a dosatron chemical pump on one of my touch free IBA. It is fed water from a onboard rotary pump that pumps around 11 gallon per minute. I have been using this setup for over 14 years and have only replaced the pump once. It is very consistent and obviously reliable. What ever pump you go...

I do visual check and see what is the most glaring thing to standout and fix it first. Otherwise swap out the free towels so I can get a batch in the washer, that way they get washed while I am cleaning bays etc. so I can get them in the dryer before I head to the next wash.

I have used Cat, Suttner, giant in the last 25 years all seemed good with cat probably being the best for me until I tried the AR AMERICAN guns with the large round dot on the side. It has a textured back strap that makes them easier to grip. No problems ever and less than $22 from KR.

Sorry to hear this. I live in a much milder crime area but I am armed full time now. Employees are also. Sad that society has got to this point.

I use it in all my IBA. The best way to heat a IBA IMO.

When it happens try wiggling the wire on the back of each photo eye. That is where they usually go bad FME.

Open your door control buttons and check for corrosion on the wires. I have had electricians wire the door controls through the buttons and seen this problem caused by a bad contact.

Generally a 24 volt coil will work at 22+ volts. It may be possible that your weep solenoid only shut off during sfr to provide clean water.