Search results

Here is what I am missing. Water to the bay doesn't need to be 120 degrees. As long as it is not "Cold" at point of use you can mix n Hot water. I don't know what the calculations are for sure but assuming city temp is 40 and Hot water from heater is 120 the difference is 80 degrees, If...

Best place to get them? They are Pricey but the time savings may be worth it.

So far, knock on wood only 1 of 8 vandalized in several years. They didn't get the $. One of the reasons I went with separate box for this was if they trashed it the coin acceptor box which goes to a vault would still work. Later that Bill acceptor box was good place to mount swipers. I got...

Seems like a lot because I have one for a Tunnel and it keeps up, but I don't use straight hot water. I have a mixing valve and adjust the cold / hot as needed. What is the max GPM of a typical large capacity on demand vs GPM on an .05 nozzle at 1200 PSI?

Anyone use these? Looks like the "Sharkbite" fittings https://www.sonnysdirect.com/sonnysdirect/en/Parts-Supplies/SELFIT-Fitting-1-2in-JIC-X-1-2in-FJIC/p/000000000040011527

I mostly use this type. No wire. https://www.sonnysdirect.com/sonnysdirect/en/Parts-Supplies/Hydraulics/Hose-Hydraulic-1-2in-Black-100ft/p/000000000040010256

Forgive my ignorance but how / where is it connected to?

It is a "Mag Tech" swper which was sent to me by World Pay. It plugs into the I pad and uses the Mercury Pay App.

Source please.

When they made the world pay switch I asked wprldpay about some options. My Tunnel has a different swiper / chip reader on the same worldpy account a r and they sent me free of charge another swiper that plugs into an I Pad and processes over my Wi Fi. using the Worldpy App.

Update - Returning the Royal Sovereign. Too Temperamental if Bills are not pristine. Keeps giving duplicate or cannot read codes.

I got lost somewhere. On the one hand you had an issue with the internet being down (been there) . Thankfully Cryptopay can help solve this and although I don't use it some providers like Comcast will sell you a back up system. As far as betting the farm ... I have a spare swiper for...

The 2 -4th Section here has automtic drains. McMaster May have other brands as well. https://www.mcmaster.com/compressed-air-filters Sorry link takes you to main page. Click on Brand an review specs for auto drain.

By the time you get done with all the experimentation and Fab you probably saved little over just buying the elbow from KR.

I do't know how that will hold up being yanked on in all sorts of temperatures.

Gave up on all but this. Keep a spare and rebuild kit on shelf. Lasts a year or two, then I swap out the unit for the spare and rebuild and order new kit . https://www.kleen-ritecorp.com/p-12901-573-hydrominder-float-valve-only-no-mounting-bracket.aspx

I have the three phase for a few years now. No issues. Got Diskin Boom from KR. Later ordered the 90 degree elbow because hose was breaking where it attached to boom and bent. Since then no issues.

Many Variables. Do you use foam generators? They may need cleaning. What are Pressures set at. If you use flo jets set air to pump at 40 and Air to make foam at 10. Make small air adjustments and see how that works out.

I run a little over 100o PSI for regular bays and a little over 1200 for Superbays.

Same here.