Search results

But im sure you have had to change the sensor? Making adjustment to come on higher would defeat the purpose of having one, you would want it to kick on at an accurate temp so you would want it to be calibrated correctly. I don't know, i just ordered a pocket weather meter so i can get a close...

I have been using brass manifolds for years for both tc and ps without any problems.

I have them mounted just like you with L brackets. I have been using a weep mizer for 20 some years.

Personally i don't think there is much you can do to deter all the aholes that will come to your wash and take advantage for 2 or 3 bucks, people are cheap and take advantage of any situation and will try and get away with whatever they can, i think all washes are under priced, there should be a...

Today I hooked 2 new sensors to my weepmizer (the older style), one 100ft, the other 50ft. When the Weepmizer was turned on the temperature said it was 54°, when checking sensor one it was 54° and sensor 2 was 54°. On my smartphone it said it was 50 degrees outside, my friends phone said the...

Your link is to a multitron not sensortron. I saw the factory .pdf it says how to adjust but not where it is set from the factory. The quarter rejection was very high, its in a vac so i brought the lid home and replaced the sensortron and it would not accept any coins, long story short i had...

Where is the the sensitivity setting set from the factory on the ginsan sensortron?

How about "do not allow children to play with or use equipment." I have told many a child to not play with that, or get off of that, or if you can't control yourself than go sit in your parents car till they get done. I actually have that on one of my signs in one carwash.

I ended up removing the bottom shelves on all three columns because it would not vend the item on those shelves, they would not go completely vertical after the vend, so there was no reason to keep them in there and really no fix for it, I took chips advice and put the grease on the wires on...

Post a pic if u can, see if we are talking about the same thing. Say if you take the column out it will work ok, but if you put it back In the cabinet it will hit the metal on the back of the cabinet when it is in place, you have to take with some force to push the shelf down. So I just pushed...

I have a model 899 3 column drop shelf electronic vendor I purchased from kleen-rite back in 2009, had a problem when it was new with the lowest shelf not falling completely vertical after a vend and at times the product would stay on the shelf, so I just pushed the bottom shelves down (which...

Never heard of a Procon pump? They were around long before diaphragm pumps. I still use one for SFR. Has been in service for 20 years. Watch it will die tomorrow LOL...

I have been using a Klopp electric coin counter for 25 years, the same one, it counts wet coins faster than dry, I use a spray bottle with just water in it to wet the coins lightly when I use it, I have sent it back to Klopp twice since I have owned it, not because it was not working but just...

I am looking to get an average price per bay for a valuation for insurance. He is asking what I thought it would cost to replace all the equipment.

Everything except the building.

It would cost to re outfit a 6 bay wash with all the equipment needed, less the building, PS, TC, FB, SFR, changers, boilers, floor heat etc.

Seems to me he is just exploiting the SS carwash to promote his own products, we sell time for space, if you are not feeding the meter than that is taking advantage of the owner of the wash, this guy should have to go through the expense of putting up a wash to have people like him take...

Need a momentary switch to pulse timer from inside equipment room to wash bays, any recommendations? Would like to purchase online.

My bank thankfully accepts bulk coins, I bag them at 1000 coins at $250.00 per bag, I just made a deposit with 12,000 coins = $3000.00. I know that is allot of coins but they never bitch, they will actually call me and ask if I am going to make a deposit of quarters because I think they have to...

Why would you use $1 coins instead of tokens valued at $1? Do you think your customers would appreciate getting a $1 coin that they can use somewhere else besides your car wash? Seems it would be easier to dispense tokens instead of purchasing $1 coins to replenish your changer. Just curious.