Search results

Couldn't find one locally, purchased from http://williamsonneelectric.com/ < they are in Massachusetts, i'm in pa so i got in 2 days.

Simple solution to the problem...magnetic switch. No problem 2 biz I understand...mep I’m surprised it to you so long to chime in…lol.

If you read the post a couple before yours I did buy the furnas switch, I was just updating on the conversation I had with square d tech support after removing both of their switches, do you think I make this stuff up? I am merely passing on information. Get this, I purchased 2 of the furnas...

I just talked to tech support at square d about the problem with both of these switches, they claimed it is a volume usage problem, if the volume is high and the usage is low the switch is working outside its range, so according to them if say the tank is to big and the compressor to small and...

You talking about a magnetic motor starter. And thanks Randy, you were right i got the 69JG7Y.

probably work, hate to get it from ebay, takes to long. Dont know what to do, between a rock and a hard place.

Look at this http://midwest-control.com/starters-switches-pressure_switches_69J.html

This is the one I have from zorotools.com http://www.zoro.com/i/G1026602/

I have also had this happen, funny it didn't burn up the compressor.

The whole # is 9013FHG32J39M1X. 230 volt , has an unloader, also has a lever on the side for off and auto. It’s a 3 hp motor, 13.3 amps. I think possibly the furnas switch I need is a 69JF7Y, which doesn’t have the lever, but do you really need that? Called schneider electric back in...

Which Furnas brand compressor pressure switch would replace a square D 9013FHG?

Fresh and it lasts for weeks !!

I have a 60 gallon upright Eaton Compressor purchased new in 2006. Started having problems about a year ago with the pressure switch, it occasionally wasn’t turning the compressor off, so on 03/20/14 I replaced the switch, about a month ago started having problems where the compressor...

Here is what I did > I have since went from an 8 yard container being full to the top and then some, to a 6 yard that is never full, still do a great vac business, just allot less garbage.

Its a newer version of the decal. The old one is a bit antiquated.

75va<transformer ÷ 24v = 3.12 amp. x this by 1.67 (167%) <allowable % of over current = 5.21 amp. is it possible you need a larger fuse?

Got new stainless steel faceplates for the meter boxes from KR to install dixmor timers, and of course they don’t fit correctly, need to grind about 1/16” off and maybe round the corners a little to make them fit. Using a 4” Makita grinder. I need to find a grinding wheel for stainless to use...

Also i agree with Robert Roman that with pure methanol if it was to ignite, you won't be able to see the flame.

I’m curious because in my wash the foam brushes don’t get used much when it is below about 20°, when it gets below that, they are not being used much at all and the AFFB is basically being used to purge the lines so they don’t freeze. I have a D/H twin tank that changes over to AFFB at 34° or...

The temp gauge in my truck is the least accurate it’s a 2011. I trust the kestrel weather meter that I linked to be the most accurate. I checked my other wash today and it was 7° lower than the actual temp, I adjusted the temp up 5°. Also called Dixmor, he said they just use a digital...