Search results

Have had about 6 Q See Systems. Now Have 5 Hikvision systems. Can get a 32 Channel DVR/ All 1080PHD. Not wireless.

Yep, It was a bad gauge . Pressure was really at about 2000PSI!

I have a seperat tire air inflator. No way to feed vacs from compressor without major excavation.

Yes, did not mean to imply applications were equivalent. The utilization would be different. It's all a question of $ / usage.

See thee thread noted. AFAIAC simpler is always better = No Foamer. I think in the thread somewhere I posted that I use 1/2 lines to the manifold above the bay. That is not correct. Air and liquid delivered by 3/8" Poly. See https://www.youtube.com/watch?v=KlRMAQnwIPw BTW I bought a pair...

https://www.kleen-ritecorp.com/p-29646-5-gallon-triple-foam-low-ph-conditioner-blue.aspx Note - it comes in 3 colors.

Chicago is at $10.00 minimum going to $10.50 this summer. $13.00 by 2019. The bakery that makes Oreos in Chicago just announced they are closing and leaving the country. Thanks Obamacare and Chicago labor protesters. More jobs gone.

I have a spare function on my meter box. Thought about the handheld dryer. Also thinking of compressed air per a post by Tom Hoffman. Putting in the compressed air would likely be a lot cheaper overall than the hand held dryers. I would need a good second compressor in the equipment room...

I've got Cat 5CP2120. Figured I'd Bump up the motor pulley 1 inch. The Pump Pulley si pretty much at max to fit the Pulley cover. Soon as I did it I started tripping the starters. Found the gauges weren't reading right and the pressure regulators may need some attention as well. Got some...

So you recommend?????

Mine are above the booms. Inherited it that way.

Had this issue and switched to Low PH product use it for both HP and Pre soak. Comes in different colors. . No more issues. Price is comparable.

I inject air into wheel cleaner Pre Soak and Wax LP functions.

When I install a pressure gauge on my SS pumps , tried the "Liquid filled from KR part #s GAL 3000B and GAL 3000R they blow apart in a short time. What are you guys using?

At one tunnel with some water pressure issues I dilute first to use the regular tips. At the SS and 3 other tunnels I just go with the Ultra lean. I think the posted dilution is 600 / 1 and you can get that with the ultra lean. I would try that first. Less hassle than diluting first.

I have done this but the only way to be sure what the dilution is .. is by checking the product drawn from the concentrate with the water used. There does not seem to be ny rel calculation that works. It's a trial and error thing.

Ultra lean hose barb replaces regular one. Just screws into the educator. We use all KR in the SS with Ultra lean tips except for when the weather calls for anti freeze foam brush soap which uses a regular tip and is adjusted manually as the temperature warrants. Had some issues with KR...

Pulley size?

http://car-wash.kleen-ritecorp.com/search?w=ultra%20lean You may want to ask then about the smaller diameter suction hose, and foot valve as well but you can get it at Home Depot. The Pink ultra lean tip is actualy the largest in that set at 360/1

Dumped Yamadas and switched to flo jets with Viton diaphrams years ago - never looked back. Make sure you have a water separator just before the supply to the pump(s) . Get an auto dump model to save yourself from having to dump it.