Search results

Anyone know where you can purchase 4x8 blank panels for a lighted sign?

Those of you that have converted your Rowe changer to a Genesis or other conversion kit, what platform did you use to sell the parts removed from the changer?

With D/H equipment the cold water rinse runs through a solenoid at city pressure, I guess there would be no way to run high pressure, cold water wax on their system, or am I missing something?:D

Check this out. http://www.photoblocker.com/

Actually I purchased the Genesis Conversion Kit from Etowah Valley for the Rowe, mine was the BC-1200, upgraded to the BC-1400. I was having trouble understanding in the instructions for the Genesis Kit about the hoppers where it says “dissemble the rear mechanism and center baffle from the...

On a 6-50276-08 High Capacity coin hopper. I took one apart to experiment with it. I can get one side together but when putting the other side on I can't get the rectangular shaped plastic tab to go in the hole correctly where it is supposed to on the side. Or if anyone has had one of...

It is so hot in the equipment room, if you have to work on anything in this heat it is killer. Have a 20" fan running all summer but it is still very hot and humid in there. What i'm trying to accomplish is like you say to make it more comfortable in the equipment room when working in there...

Portable Air Conditioners. Has anyone ever used a portable ac unit inside there equipment room?

They are 3min. I'm $2.00 for 4 min. But this guy just recently talked about raising his price to $2.50, so how you going to do that when your sellin' it for a buck? I think his going to hurt himself.

Down the road about 1 mile a sort of neglected Carwash, 1 Tunnel Wash, 4 SS Bays, I think they purchased it August or September, they fixed it up, gave it a paint job. They are now for the third time advertising out front and on there changeable sign 1/2 price on the SS bays. I have been in...

Are these a disk lock? Where do you get them?

I can't even find a Kip NO like this one: http://www.kleen-ritecorp.com/p-1851-kip-solenoids-14-24v-metering-none-orifice18.aspx The NO Kip listed on that page won't work, wouldn't be able to mount it. It looks like its going to be a special order for a kip NO. :D

This one has a conduit fitting where the wires are. Its mounted sidways in the panel box.

Anyone know who makes a solenoid valve like this besides d/h? Its NO 24v trickle for the weep. Its got a 1/8 orifice. 1/4 in and out. There is one for each bay. Thats Solenoid, sorry.

Didn't know that you could plumb the fittings right into the foam generator, although when you think about it, it makes sense. Currently I am using tees like above with the air, liq, affb, (1/4") coming in, and a 3/8ths barb out, with 3/8ths hose running to the bay. I am going to just cut the...

Whats the third hole for? Also below is a picture of one I purchased, it is just an 1.5" coupler with 2- 1.5 x 1/2" threaded reducer bushings, But it looks like it is stuffed with copper pot scrubber.

There is no bladder, dh/12 controller, kind of like your setup Randy with the mx8. The pump is rated at 20gpm, thats max., I use regulators on all the LP liquid lines. Like an air pump, it pumps only what it needs, up to 20gpm @ 43psi.

I was just curious as to what setting's others were using on the FB for air and liquid, and if they were using FB generators. Sometime I think we get off track as to what the original question is, not that I don't appreciate the information, but rather would have seen more post’s like, I use __...

I do have separate adjustments for each bay liquid and air on each solenoid. Also have regulators on both air and liquid. I did it that way per your suggestions on a post a couple of years ago when I was re-doing the LP functions. I think I have to just play with it, until I get the desired...

The pump on the FB is: Goulds G&L, 1x 1 1/4 - 6 , 1st1c1c3, Imp dia 5 3/16. I can get 40 psi on the liquid side but when I set it that high there is way to much product coming out. (at 20 on Liquid and 15 on air it comes out way to much). I don't see how you guys could be at 40 on the liquid...