Search results

we're gonna try that tonight, or tomorrow night. My dilemma is, I'm a full time coach/teacher, & can never get there til after 5pm, or on weekends... :(

The pump comes on if you by pass the GS-27D on bays 2 & 3. The functions aren't working properly, but you can pump water, though not take money 7 & perform functions correctly. My pumpstand looks like your image 1, except mine has same AB contactors as your image 4. Your's appears to have the...

Bay #1 has worked like a champ, w/ zero issues. Bay #2 was first to mess up (failed GS-27D I was told), & was chattering to the point of throwing the breaker....Replaced GS, & it worked for 10 days. Now, bay #3 is messed up (GS again, as told by my electrician). Bay #3 doesn't chatter, just...

never thought of that, but I do believe there is a switch in there! Wouldn't that affect all 3 of my bays, though?

My water level in holding tank seems fine...If that's what you're talking about...? Man this is frustrating!

cwguy, that's what I'm thinking......that it must be something else. Common sense is telling me that. We just replaced the GS, & it messed up in 10 days. Also, we seemed to have diagnosed it going bad on bay 3 as well.....frustrating...!!!!

Is it very hard to replace these tires, if you're just gonna replace the tire only (& not the wheel & inner tube)? Or should I go ahead & replace the inner tube , along with the tire?

My wheel is fine, but tire is very cracked. Should I just replace the tire, & leave wheel & tube intact? They're actually holding air pretty good, though. They just look rough on the sides... Also, odd question: Does it prolong the life of the tires if you periodically put some tire foam on...

we bypassed GS -27D, & it would fire up & work. Does that mean GS 27-D is bad? That's what I am thinking...

Where is the best, & cheapest wheel/tire? Why do you need S.S.?

Can you buy the complete wheel, tube, tire, & just put it on? I noticed they have those at Tractor Supply. Anyone else have any good ideas?

Autocorrect: should read "spots" do you grease....

Is the coinbox actually where you put your money, in the bays? Forgive my ignorance, as I just bought this, after coaching 24 yrs. Buttons , & switch. Where are those? Where you put your quarters, in the bays?

When you say "coinbox", what exactly are you referring to? Also, what do you mean by "coinbox switching...ER controls " ?

What all spits do you grease the bridge? I checked the tires, & they were woefully underinflated! I put em up to 25lb, & 'voila, it works good again. Thanks guys!

First time I've really had a problem w/My L-W 4000. It stops in mid wash, will continue to spew the 3x foam, or wherever it is. Gave an error code of "Idle Fault Motor RunOn". What is causing that? Having some very frustrated customers, & an extremely frustrated owner. Any advice? My cell is...

Put your Laser in the front of the bay, under cover. It will extend out a couple feet while "In Wash", but just for a few seconds at a time. This is what I did.

GinSan has A LOT of parts to it!

Well, I think the 3 vendor would be perfect for Lil Trees...? Can't imagine how Lil Trees doesn't have 1 3 item decal for that....

I just taped the overlay on there, but wanted to do a sharp looking 3 vend Lil Trees decal. I thought surely Lil Trees recognizes this opportunity.....?