Search results

Have any of you guys ever purchased a used RO unit? Are they reliable and easy to rebuild ? Are you applying it with high pressure or low pressure?

Thanks guys. My water hardness is about 10. We soften everything to 0 but everything still spots.

My current functions at the wash are tire/engine cleaner, presoak, hp soap, foamy brush, hp wax and rinse. Based on your experience what would be the best function that I could add to the wash. Tri foam, dryers, RO, rainx? Does anyone have any experience with a low pressure wax that would be...

2biz what kind of hose did you use to plumb your pump? I love the clear tubing but can’t seem to find it anywhere.

The way my pumps are set up now the water enters the at the bottom left exits at the bottom right then goes through the regulator and enters the top left and out the top right. Is that correct?

Looks like I’ll be changing out the regulator on the pump. I know you guys had mentioned that the water was very turbulent going through the pump due to the way it was plumbed. Can you give me some recommendations on how to improve that? I was under the assumption that a pump could basically be...

Not yet. Will try that soon and let you know what happens. I appreciate the help guys. I’m still new to the industry and still learning. I have done all the repair and maintenance work myself. Some things I still don’t understand all the ins and outs of. Your help is greatly appreciated.

The only pump that rattles is the top left. Can MEP or IB or anyone else post a picture of how a pump should be correctly plumbed?

Guys, I’m totally lost with the inlet and the outlet and where the regulator should be. Should these be replumbed? What is the correct way they should be plumbed

I checked the belts for cracks everything looks good. The pump did seem to be pulsating. Can anyone tell me how to adjust the regulator? The only way that I see that may be possible to adjust are through 2 tiny holes on each side?

Silly question here but are these my regulators?

The sound and rattling is definitely worse when the trigger is pulled. The moment the trigger is pulled is the worst. I initially thought the belt was loose or was about to break but that wasn't the issue. Also, I forgot to mention this earlier. The pressure at the pump is reading almost 1500...

Hey guys, I have a few questions about guns, tips, and pumps. My pumps are all cat 5cp2120w. My bays were originally all set up to run 3 gpm. The guns I have been using were giant 21295cx. I recently started replacing some guns with giant 21295c model guns. I have always been using 2505 tips...

Good afternoon guys, I hope everyone is surviving the cold. I have a question about flojets. The chemicals in my low pressure functions are freezing up on really cold nights. The original owner did not built a trough for the chemical lines. Each low pressure function has 1 flojet that mixes the...

I will fix the chem line tonight. The hydrominder do have a built in siphon break.

Earl for whatever reason this is the way the lines were origanlly ran. They are pulling chemicals from the floor and the installer zip tied them to the water line that feeds the minder. I will fix them today so that the high point is the injection point. I think my foot valves are good but I...

Good morning guys, I was hoping for some help. I have the hydrminder 5111's that supposedly have a vacuum break built in. My problem is that after chemicals are mixed and the hydrominder kicks off I had air back flowing into my chemical lines. The air causes huge gaps in my chem lines which...

I should also say that the rep told me that I would be using 1 bag of salt every 3-6 weeks.

Thanks for the response guys. My understanding is that we were going to filter and soften all of the water through the wash. I know this will increase the cost of salt but will increase the life of my equipment in the long term? The quote that I received included cvac-1054 auto backlashing...

Good afternoon Guys, I hope everyone is doing well. I have some questions about softeners and filtration. I understand that softeners are a vital piece of equipment both for chemical costs and the life of your equipment. I currently do not have a softener but am in the process of getting some...