Search results

No never. I thought shutting down the machine by turinign the swtich on th elion would do that. Is there any specific spot that I need go?

Hello, this error keeps coming up although I have changed the oil less than 6 month ago as its recommended.

Yes, the Measurement eye was totally off, changed it and BOOM all good again. Good thing I had a spare, also easy to change. I should have started from the eyes than the prox sensors. What misled me was the fact that the light on the 1prx sensor was not turning on when it was in front of metal...

Hi, I got a WW2.0 that for some reason goes to both end of the track when it work and the boom doesn't come down, as if the whole measurement system is off. I get Alarm 100 "Measurement eye was not ON at the start of the wash, check for loose connections", and then Alarm 68,69 because the...

UPDATE: The problem became permanent. I had to manually push the witch on the contactor down for the motor to start working. Replaced the contactor which had some signs of burn and checked it with Ohm meter showing one of the connection not always working.

Thanks, I have not done the X measurement, but its easy to see that one side stays closer to the end track than the ther side so it is twisted. How do you do this X measurments?

Thanks its so good to know i'm not the only one had to do this. here is a picture of how I have done it. its springy shape helps the sensor to detect it but my concern is that the sensor failes after few month since it is in direct contact with the metal. after all it supposed to be a proximity...

Hello, I have a WW2.0 from Coleman. Problem: the machine rocks due to Passenger side front wheel lifting itself up starting ~10 feet from the Home position. Therefore the proximity sensor can not detect the Home position metal and the machine hits itself to the end of the track. I have had...

Thanks this is exactly what I just did last night on my other pump, worked perfectly, although I still like to push the pump forward like 1/8" (left side is good, the right side only) , but it simply wont move forward. I did not put my whole weight on it, but I think I had enough force on the...

Yes the current is the same as other pumps. And no the motor does nto get hot or making noise...yes I had a guy who greased it 1.5 years ago. I also talked to the manufacturer, these motors supposed to be greased, only one pump every 6 month

Well the motor tripped again after two weeks. I think its because I have not lubricated it for over a year. The specs says it supposed to be lubricated but it has two nipples. Do I need to lubricate both nipples? here is some pics. Thanks

haha, as a Canadian we love to move to Florida...

My electrician checked the current and it looks normal (the same as other mototrs about 9A). He said nothing wrong with the contactor, so simply cut the head and put the wire back in. Measured the current and looks normal. Will see if the problem comes back...

Yes it is for sure warmer than the others. So i guess the contactor need to change too

Thanks guys as always very helpful. Do you think i need to change the contactor? Or no this is just a matter of cutting the head, cleaning the connection (with Contact Cleaner spray) and putting it back?

Today one of our pumps stopped working. Turned off/on the main breaker and started again. Noticed the wiring connected to the contractor in the electrical box ( not quite sure whats called perhaps MCC, i have Super Savor Coleman Hanna for my wandwash) is melted. My electrician will come to...

Hello, I took over my carwash more than 2 years and since then no vacation or time off. I love my carwash specifically now I know the problems and I have all the spare parts. However I dont expect my staff to do repairs. I am looking for another car wash owner here in Calgary who is willing to...

Thanks, how do you "roll the belt off"? By a flat crew driver while turning the pulley? After moving the pump 1/8", don't you need to use a plyer to put the belt back on? I'm trying to find a way to not to use a plyer. What happens if the belt is not 100% under tension? I mean right now the pump...

Hello, I had to change the belt on one of our CP2120. Last time I didn't loose the pump and kind of forced the new belt on the pulley. This time I loosened the pump, moved it backward a bit and it was much easier to remove the old belt and put the new one. But, how do I put enough tension on the...

I would start from changing the check valve under the hot water tank for those two bays. I had an issue with one my bays pretty much stopping when switching to high pressure (either wax, soap or rinse) sometimes, not all the time ( i hate intermittent problems). The issue was a bad check valve...